Eshop roka 2025 s vykurovacou technikou

SET M - IVAR - Thermostatic and Regulatory Valve - Pre-set - 1/2" x EK; 15x1; Corner IVAR.KIT M-RO 02

Mã số: KIT50083115
Chưa được đánh giá Chi tiết đánh giá
68,88 € –20 %
Vykurovacia technika SADA M - Ventil IVAR - termostatická a regulačná armatúra - s prednastavením - 1/2"xEK; 15x1; rohové
68,88 € –20 % 55,10 € / Cái 44,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

M-sarja - venttiili - termostaattinen ja säätöventtiili, IVAR.KIT M - RO 02, koko: 1/2" x EK, 15 x 1
- esiasetuksella, kulma
 
  • IVAR.M - RO 02 - kulmainen malli
  • liitännälle kupariputkeen tai monikerroksiseen putkeen ALPEX IVAR.TR (kupari Ø 15 x 1 mm), IVAR.TA (ALPEX Ø 16 x 2 mm)
  • liitännälle 1/2“ sisäpultilla varustetuille patterille (esim. KORADO, PURMO, KORAD)
  • materiaali nikkelöity messinki CW617N

 

Huomio: SARJA koostuu termostaattisesta päästä, kompaktista liitoslaitteesta integroidulla termostaattiventtiilillä ja säätöpultilla, sekä kupariputkeen tai monikerroksiseen putkeen IVAR.TA (ALPEX Ø 16 x 2 mm) tarkoitetuista puristusliittimistä, kiristysmomentti IVAR.TA 4420 = 20-35 Nm, IVAR.TR 4430 = 35-45 Nm.

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T) - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska ne ovat turvallisuustoimintoisia komponentteja.

Các thông số bổ sung

Danh mục hàng: M - VENTIL IVAR
Bảo hành: 2 năm
Trọng lượng: 0.773 kg
EAN: 8595145907342
Kierteen koko: 1/2"
Tyyppi: sarja venttiili + liitin
Venttiilin malli: kulma
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:06:43

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

B avatar của tác giả 10.11.2026 18:10
Hejsan, jag har kopparrör 15x1 i systemet men undrar om det går att koppla den här ventilen mot en Purmo-radiator med 1/2"-anslutning utan problem?
A avatar của tác giả 10.11.2026 18:10
Hej Björn! Ja, det fungerar bra - satsen är gjord just för koppling mot armaturer med 1/2"-invändig gänga, så Purmo, Korado och Korad passar utan vidare. På rörsidan ansluter du med IVAR.TR för koppar Ø 15x1 mm, och hela armaturen är vinkelformad med förinställning. Tänk på åtdragningsmomentet, 35-45 Nm för IVAR.TR, så sitter kopplingen tätt och säkert.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.