Eshop roka 2025 s vykurovacou technikou

SARJA M - IVAR - termostaattinen ja säätöventtiili - esiasetuksella - 1/2"xEK; 15x1; suora IVAR.KIT M-PR 01

Mã số: KIT50082315
Chưa được đánh giá Chi tiết đánh giá
66,17 € –19 %
Vykurovacia technika SADA M - Ventil IVAR - termostatická a regulačná armatúra - s prednastavením - 1/2"xEK; 15x1; priame
66,17 € –19 % 52,94 € / Cái 43,04 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

M-sarja - venttiili - termostaattinen ja säätöventtiili, IVAR.KIT M - PR 01, koko: 1/2" x EK, 15 x 1
- esiasetuksella, suora
 
  • IVAR.M - PR 01 - suoraviivainen
  • liitettävä kupariputkeen tai monikerroksiseen putkeen ALPEX IVAR.TR (kupari Ø 15 x 1 mm), IVAR.TA (ALPEX Ø 16 x 2 mm)
  • liitettävä 1/2“ sisäpultilla varustettuihin pattereihin (esim. KORADO, PURMO, KORAD)
  • materiaali nikkelöity messinki CW617N

 

Huomio: SARJA koostuu termostaattisesta päästä, kompaktista liitoslaitteesta, jossa on integroitu termostaattinen venttiili ja säätöpultti, sekä kupariputkeen tai monikerroksiseen putkeen IVAR.TA (ALPEX Ø 16 x 2 mm) tarkoitetuista puristusliittimistä, kiristysmomentti IVAR.TA 4420 = 20-35 Nm, IVAR.TR 4430 = 35-45 Nm.

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus suoritettava ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asennuksen voi tehdä myös kotona, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenvähennysventtiilit) asennuksen on aina suoritettava ammattilainen, koska ne ovat turvallisuustoimintoja.

Các thông số bổ sung

Danh mục hàng: M - VENTIL IVAR
Bảo hành: 2 năm
Trọng lượng: 0.732 kg
EAN: 8595145907328
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:03:51

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 05.09.2026 20:15
Hello, does this valve set work with 15x1 copper pipe directly, or do I need additional fittings?
A avatar của tác giả 05.09.2026 20:15
Yes, this set is designed for 15x1 pipe (compression fitting - EK), so you connect it directly to 15x1 copper pipe without extra fittings. The thread side is 1/2", which is a standard size for most radiator connections. It also has presetting functionality, so you can balance the flow right on the valve itself.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.