Eshop roka 2025 s vykurovacou technikou

IVAR.NS 30 AL -järjestelmän eristelevy kuivalle lattialämmitykselle – 30 mm, 1600 × 600 mm, 6 kpl (5,76 m²) IVAR.NS 30 AL

Mã số: NS30AL
Chưa được đánh giá Chi tiết đánh giá
66,17 € –19 %
Systémová izolačná doska IVAR.NS 30 AL pre suchý systém – 30 mm, 1600 × 600 mm, balenie 6 ks (5,76 m²)
66,17 € –19 % 52,94 € / m2 43,04 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Levy IVAR.NS 30 AL koodilla NS30AL on järjestelmäsuojalevy kuivalle lattialämmityskäyttöön. Levy on 30 mm paksu ja sen suurikokoinen koko on 1600 × 600 mm, mikä vastaa hyötyalaa 0,96 m² levyä kohden.

Ominaisuudet

  • putkien asennusväli 150 mm
  • lattalämmityksen putkille, joiden ulkohalkaisija on 16 mm
  • pinta AL-kalvolla, joka heijastaa lämpöä
  • eristeen paksuus 30 mm
  • pakkaus 6 kpl, yhteensä 5,76 m²

Ohuempi vaihtoehto 20 mm eristeellä on koodi NS20AL (pakkaus 9 kpl = 8,64 m²).

Kun lasket tarvittavan määrän, käytä 0,96 m² levyä kohti – jaa huoneen pinta-ala tällä arvolla ja pyöristä tulos ylöspäin.

Tekniset tiedot

KoodiNS30AL
ValmistajaIVAR
TyyppiIVAR.NS 30 AL
Lajijärjestelmäsuojalevy – kuiva järjestelmä
Eristeen paksuus30 mm
Levyn koko1600 × 600 mm
Hyötyala levyä kohden0,96 m²
Asennusväli150 mm
Ulkohalkaisija16 mm
PintaAL-kalvo lämmön heijastamiseen
Pakkaus6 kpl (5,76 m²)

Usein kysytyt kysymykset

Minkä halkaisijan putkille levy on tarkoitettu?
Lattalämmityksen putkille, joiden ulkohalkaisija on 16 mm, asennettuna 150 mm välein.

Kuinka paljon yksi pakkaus peittää?
Yksi levy on 0,96 m², joten 6 levyn pakkaus peittää 5,76 m².

Miten levyt NS20AL ja NS30AL eroavat toisistaan?
Eristeen paksuudella – NS20AL on 20 mm, NS30AL 30 mm – ja pakkauksessa olevien levyjen määrällä (9 kpl vs. 6 kpl). Koko 1600 × 600 mm, asennusväli 150 mm ja AL-kalvo ovat samat.

Các thông số bổ sung

Danh mục hàng: IVAR ERISTYS
Bảo hành: 24
Saatavuus: Varastossa tai toimittajalla
Koodi: NS30AL
Valmistaja: IVAR
Tyyppi: IVAR.NS 30 AL
Laji: järjestelmän eristelevy kuivalle järjestelmälle
Eristeen paksuus: 30 mm
Levyn mitat: 1600 × 600 mm
Käyttöala levystä: 0,96 m²
Asennusväli: 150 mm
Ulkoputken halkaisija: 16 mm
Pinta: AL-kalvo lämpöheijastimena
Pakkaus: 6 kpl (5,76 m²)

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.