Eshop roka 2025 s vykurovacou technikou

IVAR.NS 20 AL -järjestelmän eristelevy kuivalle lattialämmitykselle – 20 mm, 1600 × 600 mm, 9 kpl (8,64 m²) IVAR.NS 20 AL

Mã số: NS20AL
Chưa được đánh giá Chi tiết đánh giá
61,50 € –20 %
Systémová izolačná doska IVAR.NS 20 AL pre suchý systém – 20 mm, 1600 × 600 mm, balenie 9 ks (8,64 m²)
61,50 € –20 % 49,20 € / m2 40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Levy IVAR.NS 20 AL koodilla NS20AL on järjestelmäsuunniteltu lämpöeristys kuivalle lattialämmitysjärjestelmälle. Levyjen eristepaksuus on 20 mm ja suurikokoinen mitta 1600 × 600 mm, mikä vastaa hyötyalaa 0,96 m² levyä kohden.

Ominaisuudet

  • putkien asennusväli 150 mm
  • lattalämmityksen putkille, joiden ulkohalkaisija on 16 mm
  • pinta AL-kalvolla, joka heijastaa lämpöä
  • eristepaksuus 20 mm
  • pakkaus 9 kpl, yhteensä 8,64 m²

Vaihtoehto, jossa eristepaksuus on 30 mm, on koodilla NS30AL (pakkaus 6 kpl = 5,76 m²).

Laskettaessa tarvittavaa määrää ota huomioon 0,96 m² levyä kohti – jaa huoneen pinta-ala tällä arvolla ja pyöristä tulos ylöspäin.

Tekniset tiedot

KoodiNS20AL
ValmistajaIVAR
TyyppiIVAR.NS 20 AL
Lajijärjestelmäsuunniteltu eristelevy – kuiva järjestelmä
Eristepaksuus20 mm
Levyn mitta1600 × 600 mm
Hyötyala levyä kohti0,96 m²
Asennusväli150 mm
Ulkomainen putken halkaisija16 mm
PintaAL-kalvo lämmön heijastamiseksi
Pakkaus9 kpl (8,64 m²)

Usein kysyttyä

Minkä halkaisijan putkille levy on tarkoitettu?
Lattialämmityksen putkille, joiden ulkohalkaisija on 16 mm, asennettuna 150 mm välein.

Kuinka paljon yksi pakkaus peittää?
Yksi levy peittää hyötyalaa 0,96 m², joten yhdeksän levyn pakkaus peittää 8,64 m².

Miten NS20AL- ja NS30AL-levyt eroavat toisistaan?
Eristepaksuudella – NS20AL on 20 mm, NS30AL 30 mm – ja pakkauksen määrällä (9 kpl vs. 6 kpl). 1600 × 600 mm mitta, 150 mm asennusväli ja AL-kalvo ovat samat.

Các thông số bổ sung

Danh mục hàng: IVAR ERISTYS
Bảo hành: 24
Saatavuus: Varastossa tai toimittajalla
Koodi: NS20AL
Valmistaja: IVAR
Tyyppi: IVAR.NS 20 AL
Laji: järjestelmän eristelevy kuivalle järjestelmälle
Eristeen paksuus: 20 mm
Levyn mitat: 1600 × 600 mm
Käyttöala levystä: 0,96 m²
Asennusväli: 150 mm
Ulkoputken halkaisija: 16 mm
Pinta: AL-kalvo lämpöheijastukseen
Pakkaus: 9 kpl (8,64 m²)

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.