IVAR.MP 5736 15x16/2 Pressfitting – ALPEX 16x2 to Cu/C-STEEL Ø 15 mm Pipe Adapter
Mã số: 512114MPCMô tả chi tiết sản phẩm
Vsuvka IVAR.MP 5736 koossa 15x16/2 (koodi 512114MPC) yhdistää kaksi puristusjärjestelmää: toisella puolella monikerroksinen putki ALPEX 16x2, toisella kupariputki tai IVAR.C-STEEL -hiiliteräsputki ulkohalkaisijaltaan 15 mm. Molemmat puolet liitetään puristamalla, joten liitokseen ei tarvita kierreväliosaa.
- ALPEX 16x2 -puoli: puristusleuat ääriviivoilla B, BE, TH, F, H, R tai U
- Cu / C-STEEL Ø 15 mm -puoli: puristusleuat ääriviivoilla M, V tai SA
- max. käyttöpainetaso PN 10, max. lämpötila +100 °C
- runko nikkelöityä messinkiä CW617N, holkki ruostumatonta terästä, tiiviste EPDM
Vsuvkaa käytetään kaikkialla, missä ALPEX-putki kohtaa kupari- tai teräsliitosputken. Purista jokainen puoli oikean profiilin ja koon leualla; leikkaa ALPEX-putki kohtisuoraan ennen asennusta, kalibroi ja poista terävät reunat.
Tekniset tiedot
| Koodi | 512114MPC |
| Valmistaja | IVAR |
| Tyyppi | IVAR.MP 5736 |
| Laji | ALPEX-puristusliitin - Cu / C-STEEL |
| Koko | 15x16/2 |
| ALPEX-puoli | 16x2 mm |
| Cu / C-STEEL -puoli | Ø 15 mm |
| Leuat - ALPEX-puoli | B, BE, TH, F, H, R, U |
| Leuat - Cu / C-STEEL -puoli | M, V, SA |
| Max. paine / lämpötila | PN 10 / +100 °C |
| Materiaali | niklattu messinki CW617N, ruostumaton holkki, EPDM-tiiviste |
Usein kysytyt kysymykset
Mitä putkia 15x16/2 -liitin yhdistää?
Toisella puolella monikerroksinen putki ALPEX 16x2, toisella kupariputki tai IVAR.C-STEEL -hiiliteräsputki ulkohalkaisijaltaan 15 mm.
Mitä puristusleukoja tarvitaan?
ALPEX-puoli puristetaan ääriviivoilla B, BE, TH, F, H, R tai U, kupari- tai teräspuoli ääriviivoilla M, V tai SA - aina putken koon ja profiilin mukaan.
Mitkä ovat liitoksen käyttörajat?
Liitin on tarkoitettu käyttöpaineelle enintään 10 bar (PN 10) ja lämpötilalle enintään +100 °C. Runko on nikkelöityä messinkiä CW617N, holkki ruostumatonta terästä ja tiiviste EPDM.
Các thông số bổ sung
| Danh mục hàng: | Suoraliittimet PRESS - kupari |
|---|---|
| Bảo hành: | 2 năm |
| Saatavuus: | Varastossa tai toimittajalla |
| Koodi: | 512114MPC |
| Valmistaja: | IVAR |
| Tyyppi: | IVAR.MP 5736 |
| Laji: | ALPEX – Cu/C-STEEL pressfitting |
| Mitta: | 15x16/2 |
| ALPEX-puoli: | 16x2 mm |
| Čeľuste – strana ALPEX: | B, BE, TH, F, H, R, U |
| Max. tlak / teplota: | PN 10 / +100 °C |
| Materiál: | niklovaná mosadz CW617N, nerezová objímka, tiiviste EPDM |
| Strana Cu/C-STEEL: | Ø 15 mm |
| Čeľuste – strana Cu/C-STEEL: | M, V, SA |
Đánh giá sản phẩm
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
Thảo luận
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
