Eshop roka 2025 s vykurovacou technikou

IVAR.LO-A90 DN 150 liitosputkisarja – 2 kpl 90° kulmaputkea jakotukin kulmapäätteille IVAR.LO-A90

Mã số: IVA49201190
Chưa được đánh giá Chi tiết đánh giá
1 280,43 € –20 %
Sada pripojovacieho potrubia DN 150 IVAR.LO-A90 – 2 kolená 90° na rohové pripojenie distribučného rozdeľovača
1 280,43 € –20 % 1 024,34 € / Cái 832,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Sarja IVAR.LO-A90 koossa DN 150 (koodi IVA49201190) sisältää kaksi kulmaputkea, joiden avulla vaakasuora jakotukki voidaan liittää kulmaan, eli 90° kulmassa, eikä suoraan akselilla. Kulmaputket on valmistettu maalattua terästä ja niissä on EPP-lämmöneristys.

Mihin jakajiin

DN 150 -versio liittyy DN 150 -liittimellä varustettuun jakajaan, jossa on DN 65 -ulostulot – IVAR.HC -sarjassa kyseessä on IVAR.HC-DN 65 -malli. DN 100 -liittimellä varustetuille IVAR.HC-DN 40 ja IVAR.HC-DN 50 -jakajille sopii IVAR.LO-A90 DN 100 -sarja (koodi IVA49201180).

Yhteenveto

  • 2 kpl 90° kulmaputkea sarjassa
  • liittimen liitos DN 150
  • maalattu teräs, EPP-lämmöneristys

Jakotukki ei sisälly pakkaukseen. Jakajien DN 150 ja DN 100 väliseen suorayhteyteen akselilla sopii aksiaalinen IVAR.LO-RC 150-100 -sarja. Asennuksen tulisi suorittaa ammattitaitoinen LVI-alan yritys.

Tekniset tiedot

KoodiIVA49201190
ValmistajaIVAR
MalliIVAR.LO-A90
Tyyppiliittimen putkisarja
Sisältö2 kpl 90° kulmaputkea
Liittimen liitosDN 150
TarkoitettuIVAR.HC-DN 65
Liitostyyppikulma, 90° kulmassa
Materiaalimaalattu teräs
LämmöneristysEPP

Usein kysyttyä

Mihin IVAR.LO-A90 DN 150 -sarja sopii?
Se on tarkoitettu vaakasuoralle jakajalle IVAR.HC-DN 65, jossa on DN 150 -liitin. IVAR.HC-DN 40 ja HC-DN 50 -jakajille sopii DN 100 -versio.

Milloin liittimen putkisarjaa käytetään?
Kun jakajaa ei liitetä suoraan akselilla, vaan kulmaan 90° kulmassa. Sarja sisältää kaksi kulmaputkea tätä varten.

Ovatko kulmaputket eristettyjä?
Kyllä, maalattua terästä olevat kulmaputket on varustettu EPP-lämmöneristyksellä. Jakotukki on tilattava erikseen.

Các thông số bổ sung

Danh mục hàng: Lisävarusteet
Bảo hành: 24
Nimellishalkaisija (DN): DN 150
Tyyppi: tarvikkeet
Koodi: IVA49201190
Valmistaja: IVAR
Tyyppi: IVAR.LO-A90
Laji: liitosputkisarja
Sisältö: 2 kpl 90° kulmaputkea
Liitin: DN 150
Tarkoitettu: IVAR.HC-DN 65
Liitostyyli: kulma, 90° kulmassa
Materiaali: maalattu teräs
Lämpöeristys: EPP

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.