Eshop roka 2025 s vykurovacou technikou

IVAR.INOX putki - ruostumaton teräs AISI 316 L - 88,9 mm; 2 mm - 6 m IVAR.IVINT

Mã số: IVINT.89
Chưa được đánh giá Chi tiết đánh giá
137,76 € –20 %
Vykurovacia technika Potrubie IVAR.INOX  - nerezová oceľ AISI 316 L - 88,9mm; 2mm - 6m
137,76 € –20 % 110,21 € / met 89,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.INOX - ruostumaton teräs AISI 316 L - 88,9 mm; 2 mm - 6 m

  • materiaali ruostumaton teräs luokka Wst. Nr. 1.4307 (AISI 304L)
  • käyttötarkoitus: terveysteknisiin asennuksiin, paineilmaan, teollisuuteen ja muihin sovelluksiin
  • todistus SZÚ Brno, DVGW

 

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (veden, lämmityksen, kaasun, aurinkolämpöjärjestelmien, paineilman jne. jakelujärjestelmät) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - erilaiset materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niillä on eri sertifioidut väliaineet.
  • Miten tämä putki liitetään? Yleensä puristusliitoksilla (press) tai hitsatuilla liitoksilla, riippuen tietystä järjestelmästä ja halkaisijasta - käytä samaan järjestelmään kuuluvia yhteensopivia putkiosia.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasun, paineilman tai hitsattujen liitosten jakelujärjestelmissä asennus on varattu henkilölle, jolla on asianmukainen ammattipätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.IVINT,IVINT4 - Putkisto IVAR.INOX
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 03.07.2026 1:24:41

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 13.09.2026 21:12
I am planning to install a high-temperature exhaust system for a commercial boiler installation and would like to confirm whether this IVAR.INOX pipe, made from AISI 316L stainless steel with a diameter of 88.9mm and a wall thickness of 2mm, is suitable for flue gas applications involving condensate exposure over extended periods of operation.
A avatar của tác giả 13.09.2026 21:12
Yes, AISI 316L is a low-carbon grade of stainless steel specifically chosen for its improved resistance to corrosion, including the kind of acidic condensate you get in flue gas systems. The 2mm wall thickness on an 88.9mm pipe gives you solid structural durability for that kind of installation. Each length is 6 metres, which is useful for longer runs with fewer joints. If you need fittings or connectors to go with it, we carry the rest of the IVAR.INOX range as well.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.