Eshop roka 2025 s vykurovacou technikou

IVAR-GAS - 26x3 - 50m IVAR.GAS

Mã số: 87026236
Chưa được đánh giá Chi tiết đánh giá
8,89 € –20 %
Vykurovacia technika Viacvrstvové potrubie IVAR-GAS - 26x3 - 50m
8,89 € –20 % 7,11 € / met 5,78 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (131 met)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.ALPEX-GAS -monikerroksinen putki, koko: 26 x 3, pakkaus: 50 m

 

  • maksimipaine PN 10, T = -20 °C - +60 °C
  • maksimityöpaine PN 5
  • käyttö talojen kaasujakelujärjestelmissä, liitetään ainoastaan IVAR.PRESS-GAS -tyyppisillä puristusliittimillä
  • AL-kerros min. 0,4 mm

 

Minimihankinta 10 metriä, lisää 10 metrin erissä.

Suositeltu käyttö PN 704 05 mukaisesti

 

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (veden, lämmityksen, kaasun, aurinkolämpöjärjestelmien, paineilman jne. jakelujärjestelmät) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niillä on eri sertifioidut väliaineet.
  • Miten tämä putki liitetään? Yleensä puristusliittimillä (press) tai hitsauksella, järjestelmä- ja halkaisijakohtaisesti - käytä yhteensopivia saman järjestelmän liittimiä.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilmanjakelujärjestelmissä tai hitsausliitoksissa asennus on varattava henkilölle, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.ALPEX-GAS - putket
Bảo hành: 2 năm
Trọng lượng: 0.273 kg
Tuotteen tyyppi: putki
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:08:59

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 24.10.2026 10:56
Bună ziua, doresc să știu dacă tubul IVAR-GAS 26x3 poate fi folosit pentru o instalație de încălzire cu apă caldă menajeră și dacă este obligatoriu să folosesc fitinguri speciale de presare sau pot utiliza conexiuni standard?
A avatar của tác giả 24.10.2026 10:56
Produsul este certificat exclusiv pentru distribuția gazului în gospodărie, nu pentru sistemele de apă sau încălzire. Conform specificațiilor, legătura se face strict cu fitinguri de presare tip IVAR.PRESS-GAS, deoarece stratul de aluminiu necesită acest sistem. Pentru alte medii precum apa, vă recomandăm să consultați categoria de țevi destinate acestui scop.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.