Eshop roka 2025 s vykurovacou technikou

Korvaava säiliö - IVAR.FP3-suodattimille; 20" IVAR.PRISLUSENSTVI

Mã số: A6040210
Chưa được đánh giá Chi tiết đánh giá
44,53 € –20 %
Vykurovacia technika Náhradná nádobka - pre filtre IVAR.FP3; 20"
44,53 € –20 % 35,62 € / Cái 28,96 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Korvaava säiliö - IVAR.FP3-suodattimille; 20"

  • PN 8, T = +50 °C
  • suodattimen koko 20“
  • juomaveden mekaanisten epäpuhtauksien suodattamiseen
  • ilman suodatinpatruunaa
  • mahdollisuus käyttää 20“ kokoisia suodatinpatruunoita
  • mitat: IVAR.FP3.200 3/4“ korkeus 565 mm, Ø 122 mm
    IVAR.FP3.200 1“ korkeus 570 mm, Ø 122 mm
    IVAR.FP3.200 5/4“ korkeus 580 mm, Ø 126 mm
    IVAR.FP3.200 6/4“ korkeus 586 mm, Ø 126 mm
  • materiaali: PP-suodattimen pää, messinkikiinnitys, läpinäkyvä säiliö PP
  • lisävarusteet katso taulukosta
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Kuinka usein suodatin/suodatinpatruuna on vaihdettava tai puhdistettava? Aika riippuu veden laadusta ja käytön tiheydestä - suosittelemme säännöllistä silmämääräistä tarkastusta ja puhdistusta/vaihtoa valmistajan ohjeiden mukaan tai näkyvän virtauksen laskun yhteydessä.
  • Mihin suodatin asennetaan? Yleensä veden pääsyöttöön rakennukseen, ennen herkkiä laitteita (lämmityskattila, vesijärjestelmä) siten, että se suojaa koko järjestelmää epäpuhtauksilta.
  • Onko asennuksen suoritettava ammattilainen? Suosittelemme, että vesijohtoon liittäminen tehdään asentajalla, varsinkin jos se vaatii olemassa olevan putken katkaisun.

Các thông số bổ sung

Danh mục hàng: Juomaveden suodattimet
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:02:23

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 13.11.2026 10:59
Me gustaría confirmar si el recipiente de repuesto para filtros IVAR.FP3 de 20 pulgadas es compatible con mi instalación actual que requiere una conexión de entrada de 1 pulgada, y qué dimensiones exactas tiene este modelo específico.
A avatar của tác giả 13.11.2026 10:59
Sí, ese modelo es compatible porque existe la variante con terminal de 1" que mide 570 mm de altura y 122 mm de diámetro. Está fabricado en polipropileno transparente y soporta hasta 50 grados centígrados. Para ver las otras opciones de tamaño o accesorios, puedes consultar nuestra sección de filtros para agua potable.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.