Eshop roka 2025 s vykurovacou technikou

IVAR.FIX 5732 MP – 1/2"F x 16/2, akseliväli 150 mm

Mã số: 520530MP
Chưa được đánh giá Chi tiết đánh giá
56,58 € –20 %
Držiak sanitárnych násteniek do sadrokartónu IVAR.FIX 5732 MP – 1/2"F x 16/2, osová vzdialenosť 150 mm
56,58 € –20 % 45,26 € / Cái 36,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.FIX 5732 MP -sarja on tarkoitettu saniteettilevyjen kiinnittämiseen kipsilevyseinään. Levyjen sisähalkaisija on 1/2" ja ne kiinnitetään 16 mm:n halkaisijaltaan oleviin putkiin; kiinnitysmalline pitää ne tarkalleen 150 mm:n etäisyydellä toisistaan.

Sarjan sisältö

  • kiinnitysmalli
  • 1/2"F x 16 -saniteettilevyt
  • asennusruuvit
  • ruuvitappeja ruuveilla
  • litteät mutterit

Asennusruuvien avulla putkien päät suljetaan paineenkestokokeen aikana. Sarja valmistetaan kahdessa versiossa – 16 mm:n putkelle (koodi 520530MP) ja 20 mm:n putkelle (koodi 520531MP).

Tekniset tiedot

Koodi520530MP
ValmistajaIVAR
TyyppiIVAR.FIX 5732 MP
Mitoitusmerkintä1/2"F x 16/2
Levyjen kierteitys1/2" sisäkierre (F)
PutkiØ 16 mm
Väliasento150 mm
Asennuskipsilevyyn
Sarjan sisältökiinnitysmalli, saniteettilevyt, asennusruuvit, ruuvitappeja ruuveilla, litteät mutterit

Usein kysyttyä

Mitä IVAR.FIX 5732 MP -sarja sisältää?
Kiinnitysmallin, saniteettilevyt, asennusruuvit, ruuvitappeja ruuveilla ja litteät mutterit.

Mikä on levyjen välinen etäisyys?
Kiinnitysmalli pitää levyt tarkalleen 150 mm:n etäisyydellä toisistaan.

Minkä putken kokoon tämä versio on tarkoitettu?
16 mm:n halkaisijaltaan oleville putkille; levyjen sisähalkaisija on 1/2". 20 mm:n putkelle on tarkoitettu koodi 520531MP.

Các thông số bổ sung

Danh mục hàng: asennusmallit
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Koodi: 520530MP
Valmistaja: IVAR
Tyyppi: IVAR.FIX 5732 MP
Mitoitusmerkintä: 1/2"F x 16/2
Levyn kierre: 1/2" sisäinen (F)
Letku: Ø 16 mm
Akseliväli: 150 mm
Asennus: kipsilevyyn
Sisältö: asennusohje, saniteettilevyt ja tulpat, ruuvit ja aluslevyt

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 14.11.2026 08:09
Trebam li ovo za cijevi od 20 mm ili samo za one od 16 mm jer mi treba razmak 150 mm?
A avatar của tác giả 14.11.2026 08:09
Ovo je točno za cijevi promjera 16 mm, a za 20 mm tražiš drugu šifru (520531MP). Razmak osi je uvijek 150 mm kod ove šablone. Ako ti treba verzija za deblje cijevi, potraži srodne proizvode u istoj kategoriji montažnih šablona.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.