Teleskopinen jatke FASTEC Quick DN 20, FF – säädettävä 126–190 mm (IVAR.TELESKOP) IVAR.TELESKOP
Mã số: RF22120200Các sản phẩm liên quan
Mô tả chi tiết sản phẩm
Pidennyksen RF22120200 (tyyppi IVAR.TELESKOP) on osa järjestelmää FASTEC Quick. Se on teleskooppinen osa, jonka pituuden voit säätää alueella 126–190 mm, joten se voidaan sovittaa tiettyyn asennustilanteeseen.
Tekniset tiedot
- halkaisija DN 20, liitoskoko FASTEC Quick F 14
- malli FF
- pidennyksen alue 126–190 mm
- nimellispaine PN 10, lämpötila jopa +95 °C
- runko messinkiä, tiiviste EPDM
Muut halkaisijat
DN 15 -putkistoihin on tarkoitettu pidennys RF12110300, jonka liitoskoko on F 13 ja alue 112–170 mm.
Vesijohtojen asennuksen suositellaan tapahtuvan ammattimaisesti, ja liitosten tiiviys tulisi tarkistaa ennen käyttöönottoa.
Tekniset tiedot
| Koodi | RF22120200 |
| Merkki | IVAR |
| Tyyppi | IVAR.TELESKOP |
| Tuotelaji | teleskooppinen pidennys, säädettävä |
| Järjestelmä | FASTEC Quick |
| Halkaisija | DN 20 |
| Liitoskoko | F 14 |
| Malli | FF |
| Pidennyksen alue | 126–190 mm |
| Nimellispaine | PN 10 |
| Maksimilämpötila | +95 °C |
| Materiaali | messinki |
| Tiiviste | EPDM-tiiviste |
Usein kysyttyä
Missä alueella RF22120200 -pidennystä voidaan säätää?
Teleskooppinen pidennys RF22120200 voidaan säätää pituudeksi alueella 126–190 mm.
Mihin järjestelmään pidennys kuuluu?
Pidennys kuuluu järjestelmään IVAR FASTEC Quick, DN 20 -halkaisijalla ja F 14 -liitoksella. DN 15 (F 13) -putkistoihin on tarkoitettu vaihtoehto RF12110300.
Minkä paineen ja lämpötilan pidennys kestää?
Pidennys on tarkoitettu nimellispaineelle PN 10 ja lämpötilalle jopa +95 °C.
Minkä materiaalin valmistettu pidennys on?
Pidennyksen runko on messinkiä ja liitos tiivistyy EPDM-tiivisteellä.
Các thông số bổ sung
| Danh mục hàng: | Jakotukkien lisävarusteet |
|---|---|
| Bảo hành: | 24 |
| Saatavuus: | Varastossa tai toimittajalla |
| Koodi: | RF22120200 |
| Tunnus: | IVAR |
| Tyyppi: | IVAR.TELESKOP |
| Tuotelaji: | säädettävä teleskopinen jatke |
| Järjestelmä: | FASTEC Quick |
| Vapausaste: | DN 20 |
| Liitäntäkoko: | F 14 |
| Suoritus: | FF |
| Pidentämisväli: | 126–190 mm |
| Nimellispaine: | PN 10 |
| Maksimilämpötila: | +95 °C |
| Materiaali: | messinki |
| Tiiviste: | EPDM-O-rengas |
Đánh giá sản phẩm
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
Thảo luận
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
