Eshop roka 2025 s vykurovacou technikou

FUTURGAS kaasukulmahana - 3/8" MF; vipu FIV.80014 P

Mã số: 80014038
Chưa được đánh giá Chi tiết đánh giá
11,11 € –19 %
Vykurovacia technika Guľový uzáver plyn FUTURGAS - 3/8"MF; páčka
11,11 € –19 % 8,89 € / Cái 7,23 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (11 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

FUTURGAS-nestekiertohanaputki, FIV.80014 P, koko: 3/8" MF, pakkaus: 36 kpl pussia / 144 kpl laatikko

 

  • PN 5, T = -20 °C - +60 °C kaasulle
  • PN 40, T = -30 °C - +120 °C vedelle
  • täystoiminnallinen, molemmin puolin jatketulla kierteellä
  • ulompi - sisempi kierre MF, vivuvaihtoehto
  • materiaali nikkelöity messinki CW617N

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (vesi-, lämmitys-, kaasu-, aurinkolämpöjärjestelmät, paineilma jne.) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niille on sertifioitu eri väliaineet.
  • Miten tämä putki liitetään? Yleensä puristusliitoksilla (press) tai hitsauksella, järjestelmästä ja halkaisijasta riippuen - käytä yhteensopivia saman järjestelmän putkiosia.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilma- tai hitsausliitoksissa asennus on varattava henkilölle, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: FIV.80014 P - sisä- ja ulkopuoliset kahvat
Bảo hành: 2 năm
Trọng lượng: 0.146 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:05

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 08.11.2026 17:47
Bonjour, je cherche une vanne pour brancher mon chauffage au gaz. Est-ce que celle-ci 3/8" MF peut résister au froid de l'hiver ou elle va casser ?
A avatar của tác giả 08.11.2026 17:47
Salut Damien ! Oui, cette vanne FUTURGAS est bien prévue pour le gaz et fonctionne jusqu'à -20 °C, donc elle devrait tenir en hiver sans problème. Elle est faite en laiton nickelé avec un passage complet pour garantir une bonne circulation du fluide. C'est exactement ce qu'il faut pour ton installation.
M avatar của tác giả 11.10.2026 12:15
Dobrý deň, chcel by som sa opýtať, či je tento guľový uzáver s rozmerom 3/8" MF a páčkou z niklovanej mosadze CW617N vhodný aj pre inštaláciu na plynové rozvody v teplotnom rozsahu do +60 °C?
A avatar của tác giả 11.10.2026 12:15
Áno, tento model je určený priamo pre plyny a vydrží teploty od -20 do +60 °C. Pripomíname však, že montáž plynových rozvodov musí vykonať iba osoba s príslušnou odbornou spôsobilosťou. Pre ďalšie informácie o podobných fitingoch nájdete kategóriu vnútorných a vonkajších páčkových uzáverov.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.