Eshop roka 2025 s vykurovacou technikou

FUTURGAS kaasukulma-venttiili - 1/4" FF; perhonen FIV.80010 M

Mã số: 80010015
Chưa được đánh giá Chi tiết đánh giá
11,41 € –19 %
Vykurovacia technika Guľový uzáver plyn FUTURGAS - 1/4"FF; motýľ
11,41 € –19 % 9,13 € / Cái 7,42 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

FUTURGAS-nestekytkin FIV.80010 M, koko: 1/4" FF, pakkaus: 36 kpl pussia kohti / 144 kpl laatikkoa kohti

 

  • PN 5, T = -20 °C až +60 °C kaasulle
  • PN 40, T = -30 °C až +120 °C vedelle
  • täysvirtauksinen, molemmin puolin pidennetty kierre
  • sisä-sisäkierre FF, perhonen
  • materiaali nikkelöity messinki CW617N

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (vesi-, lämmitys-, kaasu-, aurinkolämpö-, paineilmasysteemit jne.) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niillä on eri sertifioidut väliaineet.
  • Miten tämä putki liitetään? Yleensä puristus- (press) tai hitsausliitoksilla, riippuen tietystä järjestelmästä ja halkaisijasta - käytä yhteensopivia saman järjestelmän liittimiä.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilmasysteemien tai hitsausliitosten asennus on varattu henkilölle, jolla on asianmukainen ammattitaito.

Các thông số bổ sung

Danh mục hàng: FIV.80010 M - sisäpuolinen - sisäpuoliset perhosventtiilit
Bảo hành: 2 năm
Trọng lượng: 0.142 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:06:52

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 23.10.2026 13:20
Üdvözlöm, a leírásban azt látom, hogy ez a csap gázra is alkalmas, de nem értem, hogy ha vízzel akarom használni, akkor is ugyanazt kell-e venni, vagy valami más anyagú kell? És hogy mennyi ideig bírja hidegben?
A avatar của tác giả 23.10.2026 13:20
Szia! Ez a konkrét típus nikkelezett sárgarézből van, és kifejezetten jó mind vízre, mind gázra. A specifikáció szerint -20 fokban is működik gáz esetén, és -30 fokban vízhez használható, szóval ezek az értékek teljesen fedik a te igényeidet. Ha bizonytalan vagy a rendszeredben, érdemes megnézni a hasonló belső pillangókaros csapok kategóriáját is.
T avatar của tác giả 24.08.2026 15:56
Toto sa dá použiť na plynové potrubie doma alebo je to len na nejaké špeciálne veci? Rodičia menia kohútik pred sporák a neviem či je to to pravé.
A avatar của tác giả 24.08.2026 15:56
Áno, tento guľový uzáver je určený práve na plynové rozvody, takže pred sporák sa hodí. Je to závit 1/4" FF, čo znamená, že oba konce sú vnútorné – treba si len overiť, aký závit má potrubie a pripojenie sporáku, aby všetko sedelo.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.