Eshop roka 2025 s vykurovacou technikou

Flexi letkus hanalle (8x12) - 1/2"FxM 10; 60 cm IVAR.136012

Mã số: 13601260
Chưa được đánh giá Chi tiết đánh giá
8,11 € –19 %
Vykurovacia technika Flexi hadica k batérií (8x12) - 1/2"FxM 10; 60cm
8,11 € –19 % 6,49 € / Cái 5,28 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Flexi letku hanan liittämiseen - taipuisa (8 x 12), IVAR.136012, koko: 1/2" F x M 10, pituus: 60 cm, pakkaus: 10 kpl
 
  • PN 10, T = +90 °C
  • ruostumattomasta teräksestä valmistettu punos, tiiviste mukana
  • kierre sisäinen - ulkoinen 1/2” F x M 10
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysytyt kysymykset

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmän todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotimestarilta, mutta säätö- ja turvaventtiileiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina asiantuntijaa, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: F 1/2" x M 10
Bảo hành: 2 năm
Trọng lượng: 0.15 kg
Kierteen koko: 1/2"
Pituus: 51 – 100 cm
Letkun tyyppi: joustava sanitaarisletku
Liitäntätyyppi: sisäkierre × ulkokierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:18

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 25.10.2026 16:09
Guten Tag zusammen, ich will den Flexi Schlauch 8x12 für meinen Heizkörper einbauen. Passt der mit den Maßen 1/2" F x M 10 und der Länge von 60 cm auch an meine alte Anlage, wenn die Temperatur bis zu +90 °C geht?
A avatar của tác giả 25.10.2026 16:09
Hallo Marco, ja, der IVAR-Schlauch ist genau dafür gemacht. Er hält die Betriebstemperatur von +90 °C sicher aus und hat die passenden Gewinde für deinen Anschluss. Die Nietrostahülse sorgt zudem für eine stabile Verbindung ohne Dichtungsprobleme.
R avatar của tác giả 26.07.2026 05:26
Chcem vymeniť pôvodnú tuhú medzenú rúrku pod umývadlovou batériou za flexi hadicu – batéria má prípojku M10 a rozvod vody 1/2". Hodí sa táto hadica priamo na takéto zapojenie, alebo potrebujem nejaký redukčný kus navyše?
A avatar của tác giả 26.07.2026 05:26
Táto flexi hadica je navrhnutá presne pre takéto zapojenie – na jednom konci má závit 1/2" Female (matica na rozvod vody) a na druhom konci závit M10 Male (priamy vstup do batériového vývodu), takže žiadna redukcia nie je potrebná. Dĺžka 60 cm je štandardná pre väčšinu umývadlových batérií a pokryje bežnú vzdialenosť medzi rohovou guľovou skrutkou a batériou. Pri montáži odporúčame použiť tesnenie, ktoré je väčšinou priložené, a hadicu neutahovať nadmerne, aby sa nepoškodilo opletenie. Ak máte hlbšie umiestnený rozvod alebo atypickú výšku skrinky, zvážte variantu s dĺžkou 80 cm z rovnakej kategórie.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.