Eshop roka 2025 s vykurovacou technikou

Joustoletku ruostumaton teräspunos - kulmaliittimellä - 5/4"MF (32x42); 50cm IVAR.2514

Mã số: 25144250
Chưa được đánh giá Chi tiết đánh giá
92,74 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez - s kolenom - 5/4"MF (32x42); 50cm
92,74 € –20 % 74,19 € / Cái 60,32 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Flexi letku punos ruostumaton - mutterilla, IVAR.2514, koko: 5/4" MF (32 x 42), pituus: 50 cm
 
  • PN 10, T = +10 °C
  • kierre ulkoinen – mutteri MF
  • ATEST juomavedelle, RÚVZ Poprad

 

Huomio:
Pituudet 30 ja 70 cm tilauksesta, suluissa olevat arvot ilmoittavat letkun sisä- ja ulkohalkaisijan mm.

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmän todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisemmissa sulkuventtiileissä kotimestari voi tehdä asennuksen, mutta säätö- ja turvaventtiileissä (turvaventtiilit, paineensäätöventtiilit) suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: Ulkokierre - mutka
Bảo hành: 2 năm
Trọng lượng: 0.8 kg
Kierteen koko: 5/4"
Pituus: 31 – 50 cm
Letkun tyyppi: ruostumaton punottu letku
Liitäntätyyppi: sisäkierre × ulkokierre
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:03:38

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 21.10.2026 11:35
Živjo, a ta fleksibilna cev s kolenom zdrži tudi vročo vodo iz toplotne črpalke, recim kakih 70 stopinj? In če imam cev z zunanjim premerom 42mm, bo to pasalo na ta 5/4" priključek?
A avatar của tác giả 21.10.2026 11:35
Ja, miruje, ta cev je narejena za temperaturo do +110°C in tlak PN 10, tako da 70 stopinj brez težav prenese. Glede mere - gre za 5/4" MF (32x42), kjer je 32mm notranji in 42mm zunanji premer same cevi, torej mora to ustrezati tvojemu priključku. Če nisi čisto prepričan, še enkrat preveri mere na svoji napravi, da se izogneš napačnemu nakupu.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.