Eshop roka 2025 s vykurovacou technikou

Flexi-letku, ruostumaton teräspunos - 3/4"FF (19x26); 100cm IVAR.2512

Mã số: 25122799
Chưa được đánh giá Chi tiết đánh giá
28,04 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez  - 3/4"FF (19x26); 100cm
28,04 € –20 % 22,43 € / Cái 18,24 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Flexi letku punos ruostumaton, IVAR.2512, koko: 3/4" FF (19 x 26), pituus: 100 cm
 
  • PN 10, T = +110 °C
  • kierre sisäinen - sisäinen FF
  • ATEST juomavedelle, RÚVZ Poprad

 

Huomio:
Pituudet 30 ja 70 cm tilauksesta, sulkeissa olevat arvot ilmoittavat letkun sisä- ja ulkohalkaisijan mm.

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on oltava putken halkaisijan mukainen.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotimestarilta, mutta säätö- ja turvaosien (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: Sisäkierre - sisäkierre
Bảo hành: 2 năm
Trọng lượng: 0.54 kg
Kierteen koko: 3/4"
Pituus: 51 – 100 cm
Letkun tyyppi: ruostumaton punottu letku
Liitäntätyyppi: sisäkierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:04:18

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 08.10.2026 08:25
Mám doma běžné potrubí na vodu a nevim, jestli se mi do toho hodí ta flexi hadice 3/4, protože mám strach, že by mohla prasknout nebo netěsnit. Je to bezpečná na pitnou vodu?
A avatar của tác giả 08.10.2026 08:25
Tato hadice je určená pro připojení vnitřní závit (FF) a má rozměr 19 x 26 mm, takže by měla sedět na standardní 3/4 palcové přípojky. Je certifikovaná pro pitnou vodu a vydrží teploty až do 110 stupňů, takže je pro běžný domácí provoz bezpečná. Pokud si nejste jistý přesným průměrem, doporučujeme změřit starou armaturu nebo se podívat na technické parametry přímo u produktu.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.