Eshop roka 2025 s vykurovacou technikou

Flanged Rubber Expansion Joint - with Stainless Steel Flanges - Series F8 - DN 32; L=93mm; EPDM BRA.F8.520

Mã số: F8520032
Chưa được đánh giá Chi tiết đánh giá
541,20 € –20 %
Vykurovacia technika Prírubový pryžový kompenzátor - s nerez prírubami - séria F8 - DN 32; L=93mm; EPDM
541,20 € –20 % 432,96 € / Cái 352 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kumipyöräinen kompensaattori - laippainen, BRA.F8.520, koko: DN 32, pituus: 93 mm

 

  • maks. paine 16 baaria, laippa PN 16 standardin STN EN 1092-1 mukaan
  • T = -10 °C - max. +100 °C
  • käytetään lämmityksessä ja ilmastoinnissa (HVAC), vesijohdoissa, paineilman jakelussa
  • materiaali - laippa: ruostumaton teräs AISI 316, joustava osa: EPDM
  • sopii vedelle, joka sisältää enintään 50 % glykoleja
  • ei sovellu höyryyn, kaasuihin eikä öljyjä tai hiilivetyjä sisältäviin nesteisiin
  • on ehdottomasti noudatettava valmistajan antamia lyhenemis-/pidentymisarvoja - katso taulukko teknisestä eritelmästä
  • JUOMAVESILLE LUVANTAVA, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen venttiili/laippa? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on oltava putken halkaisijan mukainen.
  • Miten tämä venttiili/laippa toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalouden mestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) osalta suosittelemme aina ammattilaista, koska nämä ovat turvallisuustoimintoja.

Các thông số bổ sung

Danh mục hàng: BRA.F8.520 - kumppensator - ruostumaton teräs
Bảo hành: 2 năm
Trọng lượng: 2.962 kg
Nimellishalkaisija (DN): DN 32
Venttiilin tyyppi: kompensaattori / tärinänvaimennin
Rungon materiaali: ruostumaton teräs
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:05:35

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.