Eshop roka 2025 s vykurovacou technikou

Faced 90° Bend - C - 15mm IVAR.IVC70

Mã số: IVC70.15
Chưa được đánh giá Chi tiết đánh giá
4,01 € –19 %
Vykurovacia technika Lícovaný oblúk 90°  - C - 15mm
4,01 € –19 % 3,21 € / Cái 2,61 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Silexoidinen mutka 90°, IVAR.IVC70, koko: 15 x 15, pakkaus: 20 kpl

  • PN 16, T = -20 °C - +85 °C - max. +120 °C
  • silexoidinen mutka 90° d x d
  • käyttötarkoitus: lämmitysjärjestelmät, sprinklerijärjestelmät, paineellinen kuiva ilma, inertit kaasut ja teollisuus
  • materiaali: hiiliteräs sinkitty
  • yhteensopiva M-tyyppisten kiinnikkeiden kanssa

Huomio: Ei sisällä pinnoitetta rajoittavia aineita, vuotaa ellei puristettu. Puristusindikaattori halkaisijalle 54 mm.
Käyttömahdollisuudet
  • lämmitysputkistojen asennus suljetussa (paineistetussa) järjestelmässä
  • jäähdytys- ja kylmävesiputkistojen asennus
  • palonsammutusvesiverkoston asennus
  • ilmastointijärjestelmien asennus
  • aurinkokeräinjärjestelmien asennus
Edut
  • nopea ja turvallinen asennus ilman hitsausta ja kierteitettyjä liitoksia
  • laaja putkien ja liittimien halkaisijoiden valikoima 15 mm - 108 mm
  • laaja käyttölämpötila-alue -20 °C - +180 °C
  • kestävä korkeaan paineeseen asti 16 baaria
  • mahdollisuus yhdistää muihin järjestelmiin
  • putkien ja liittimien pieni paino
  • korkea asennuksen esteettisyys
  • kestävyys mekaaniselle vaurioille


Putki ei ole sertifioitu juomavedelle.

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (vesi-, lämmitys-, kaasu-, aurinkojärjestelmät, paineilma jne.) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - erilaisilla materiaaleilla (ruostumaton teräs, hiiliteräs) on erilainen korroosionkestävyys ja eri sertifioidut väliaineet.
  • Miten tämä putki liitetään? Tavallisesti puristusliitoksilla tai hitsatuilla liitoksilla, riippuen järjestelmästä ja halkaisijasta - käytä yhteensopivia saman järjestelmän liittimiä.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilmajohtojen tai hitsattujen liitosten asennukset on varattu henkilölle, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.IVC70 - pitkät 90° kulmat
Bảo hành: 2 năm
Trọng lượng: 0.088 kg
Liittimen tyyppi: kaari / mutka
Putken halkaisija: 15 mm
Järjestelmän materiaali: hiiliteräs
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:00:23

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 24.08.2026 17:16
Hello, my dad needs to make a 90° turn in a 15mm copper pipe and someone at school said there are different types of elbows - is this the right one for press fittings or do we need something else?
A avatar của tác giả 24.08.2026 17:16
Hi! Áno, toto je presne to, čo hľadáte - je to lícovaný oblúk 90° pre press systém, priemer 15mm, takže pasuje na medené potrubie 15mm spojené press technikou. Lícovaný znamená, že je zarovnaný na konci, čo sa hodí pri inštalácii blízko steny alebo inej prekážky. Len sa uistite, že máte aj príslušné press kliešte na montáž.
A avatar của tác giả 21.01.2022 15:20
Dobry den, je mozne tieto obluky z uhlikovej ocele pouzit aj na pripojenie radiatorov ked su rozvody robene systemom Hepworth ? Je ich mozne vsunut povedzme do Hepworth kolien? Za odpoved Dakujem.
A avatar của tác giả 21.01.2022 15:20
obrý deň. Ono to v skutočnosti ide, aj niekoľko zákazníkov to tak používa, avšak výrobca o tom nepíše nikde, ako napríklad u medi. Med je v skutočnosti mäkšia, takže sa do nej zubky zo spojky bez problémov zakusnú. Uhlíková oceľ o čosi tvrdšia, ale funguje to i tak, avšak ako píšem, nikde to nieje oficiálne zverejnené.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.