Eshop roka 2025 s vykurovacou technikou

F8-sarjainen laippakumi-kompensaattori - DN 40; L=93 mm; NBR BRA.F8.100

Mã số: F8100040
Chưa được đánh giá Chi tiết đánh giá
117,83 € –20 %
Vykurovacia technika Prírubový gumový kompenzátor- séria F8 - DN 40; L=93mm; NBR
117,83 € –20 % 94,26 € / Cái 76,63 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kumin kompensaattori - laippainen, BRA.F8.100, koko: DN 40, pituus: 93 mm

 

  • maksimipaine 16 bar, laippa PN 16 mukaan STN EN 1092-1
  • T = -10 °C enintään +80 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, paineilma
  • materiaali - laippa: sinkitty teräs, joustava osa: NBR-kumia, vahvistettu nailonilla
  • käytetään vedelle, joka sisältää jopa 50 % glykolia
  • on ehdottoman tärkeää noudattaa valmistajan antamia lyhenemisen/pidentymisen arvoja - katso taulukko teknisestä tiedotteesta

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa asiantuntijalle, koska ne ovat turvallisuustoimintoja.

Các thông số bổ sung

Danh mục hàng: BRA.F8.100 - kumppensator - joustava elementti NBR:stä
Bảo hành: 2 năm
Trọng lượng: 3.175 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:19

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 06.11.2026 20:09
Wir brauchen einen Kompensator für unsere Heizung, die mit Glykol läuft. Passt der hier wirklich bis 50 % Glykol und hält er auch bei 80 Grad? Ich will nicht, dass der Gummi nach ein paar Monaten kaputtgeht.
A avatar của tác giả 06.11.2026 20:09
Ja, das passt genau, denn dieser Gummikompensator ist laut Spezifikation für Wasser mit bis zu 50 % Glykol ausgelegt und verträgt Temperaturen bis maximal 80 °C. Das Material des elastischen Elements besteht aus NBR, was dafür sorgt, dass er unter diesen Bedingungen zuverlässig funktioniert. Wenn du noch etwas Ähnliches suchst, schau dir einfach die Kategorie der Gummikompensatoren an.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.