Eshop roka 2025 s vykurovacou technikou

F8-sarja - Ruostumattomasta teräksestä valmistettu laippaholkki - DN 40; L=93mm; EPDM BRA.F8.520

Mã số: F8520040
Chưa được đánh giá Chi tiết đánh giá
599,01 € –20 %
Vykurovacia technika Prírubový pryžový kompenzátor - s nerez prírubami - séria F8 - DN 40; L=93mm; EPDM
599,01 € –20 % 479,21 € / Cái 389,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kumi-jousituskompensaattori - laippainen, BRA.F8.520, koko: DN 40, pituus: 93 mm

 

  • max. paine 16 bar, laippa PN 16 mukaan STN EN 1092-1
  • T = -10 °C - max. +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, paineilma
  • materiaali - laippa: ruostumaton AISI 316, joustava osa: EPDM
  • käyttö vedelle, jossa on jopa 50 % glykoleja
  • ei sovellu höyryyn, kaasuihin ja öljyjä tai hiilivetyjä sisältäviin nesteisiin
  • on ehdottoman välttämätöntä noudattaa lyhenemisen/pidentämisen arvoja valmistajan ohjeiden mukaisesti - katso taulukko teknisestä tiedotteesta
  • ATEST juomavedelle, RÚVZ Poprad

 

Usein kysyttyä

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liittymiskokojen on vastattava putken halkaisijaa.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: BRA.F8.520 - kumppensator - ruostumaton teräs
Bảo hành: 2 năm
Trọng lượng: 3.274 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:06:10

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 13.09.2026 10:09
Dobrý deň, chcem sa opýtať, či tento kompenzátor DN 40 pasuje na bežné oceľové potrubie, alebo musím mať nejakú špeciálnu prírubu? Robíme rekonštrukciu kúrenia a neviem či to spasujeme.
A avatar của tác giả 13.09.2026 10:09
Ahoj, nerez príruby na tomto kompenzátore sú štandardné, takže by to na bežné potrubie DN 40 pasovať malo. Dôležité je skontrolovať roztečový kruh a priemer otvorov na vašej existujúcej prírube, aby sedeli. Ak si nie ste istí, pokojne nám pošlite rozmerový výkres alebo foto a pomôžeme to overiť.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.