Eshop roka 2025 s vykurovacou technikou

F8-sarja - Prikolainen kuminen kompensaattori - DN 80; L=116 mm; NBR BRA.F8.100

Mã số: F8100080
Chưa được đánh giá Chi tiết đánh giá
162,36 € –20 %
Vykurovacia technika Prírubový gumový kompenzátor- séria F8 - DN 80; L=116mm; NBR
162,36 € –20 % 129,89 € / Cái 105,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kumipyöristys - laippainen, BRA.F8.100, koko: DN 80, pituus: 116 mm

 

  • max. paine 16 bar, laipat PN 16 mukaan STN EN 1092-1
  • T = -10 °C - max. +80 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, paineilma
  • materiaali - laipat: sinkitty teräs, joustava osa: NBR-kumia, vahvistettu nailonilla
  • käytetään vedelle, joka sisältää jopa 50 % glykoleja
  • on ehdottomasti noudatettava valmistajan antamia lyhenemisen/pidentämisen arvoja - katso taulukko teknisestä tiedotteesta

Usein kysytyt kysymykset

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: BRA.F8.100 - kumppensator - joustava elementti NBR:stä
Bảo hành: 2 năm
Trọng lượng: 6.093 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:08:02

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 01.11.2026 19:30
Poštovani, imam sustav grijanja s dodatkom glikola za zaštitu od smrzavanja - može li ovaj kompenzator podnijeti takav medij, i do kojeg postotka glikola je testiran?
A avatar của tác giả 01.11.2026 19:30
Može, ovaj F8 kompenzator s NBR elastičnim elementom predviđen je za uporabu s vodom koja sadrži do 50% glikola, tako da vaš sustav spada u predviđene uvjete rada. Samo obratite pažnju da radna temperatura ne prelazi +80°C i tlak 16 bar, te obavezno pogledajte tablicu skraćivanja/produživanja u tehničkom listu prije montaže. Ako trebate i druge dimenzije iz F8 serije za usporedbu, pogledajte ostatak te kategorije.
H avatar của tác giả 10.10.2026 18:10
Hejsan, jag har ett rör som heter DN 80 och undrar om denna gummikompensator passar till det? Jag vill använda den i min värmepump för vatten men är lite osäker på om temperaturen blir för hög eller om materialet håller.
A avatar của tác giả 10.10.2026 18:10
Hej Hugo! Ja, denna modell är exakt gjord för rörstorleken DN 80 och klarar temperaturer upp till +80 grader, vilket passar bra för din värmepump. Materialet tål också vatten med glykol och flänsarna sitter fast i galvaniserat stål så de håller tätt. Kolla bara att ditt system inte går över 16 bar tryck så är allt rätt.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.