Eshop roka 2025 s vykurovacou technikou

EVOLUTION palloventtiili - 6/4" FF; vipukahva FIV.80001 P

Mã số: 80001112
Chưa được đánh giá Chi tiết đánh giá
63,84 € –20 %
Vykurovacia technika Guľový uzáver voda EVOLUTION - 6/4"FF; páčka
63,84 € –20 % 51,07 € / Cái 41,52 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (4 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

FF-liitospalloventtiili EVOLUTION, FIV.80001 P, koko: 6/4" FF, pakkaus: 4 kpl pussia kohti / 16 kpl laatikkoa kohti
- pidennetyllä kierteellä
 
  • PN 25 
  • T = -20 °C – +120 °C
  • sisäkierre – sisäkierre FF, kahvavaihtoehto
  • kaksipuolisesti pidennetyt kierteet, täysi virtaus
  • materiaali nikkelöity messinki CW617N
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylittävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turva-venttiileiden (turvaventtiilit, paineensäätöventtiilit) kohdalla suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: Sisäpuoliset - sisäpuoliset kahvat
Bảo hành: 2 năm
Trọng lượng: 1.024 kg
Venttiilin tyyppi: palloventtiili / pallohana
Kierteen koko: 6/4"
Liitäntätyyppi: sisäkierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:04:38

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 31.10.2026 16:56
Bună ziua, vreau să ajut tata la montat robinetul ăsta la țeava de apă rece din baie, dar nu știu dacă ține și la apă caldă dacă facem vreodată centrală. Până la ce temperatură rezistă și e ok să-l pună el singur sau trebuie neapărat un instalator?
A avatar của tác giả 31.10.2026 16:56
Robinetul rezistă la temperaturi între -20°C și +120°C, deci merge fără probleme și pe circuitul de apă caldă, nu doar pe rece. Fiind un robinet de închidere simplu, cu manetă, îl poate monta și tatăl tău fără probleme, nu e nevoie de specialist ca la cele de reglare sau siguranță. Important e doar să verifice că filetul 6/4" FF se potrivește cu țeava existentă.
R avatar của tác giả 10.09.2026 07:45
Dobrý deň, chcem sa opýtať, toto sa mi zmestí na rúru čo mám doma pri bojleri? Neviem presne aká je veľká, ale vyzerá dosť hrubá, asi tak na palec a pol alebo možno viac.
A avatar của tác giả 10.09.2026 07:45
Dobrý deň, tento uzáver má závit 6/4 palca, čo je práve palec a pol – takže ak máte rúru s týmto závitom, pasovať by mal. Odporúčame si to pred kúpou overiť priamo na rúre, ideálne kľučom alebo páskou zmerať obvod závitu, aby ste mali istotu. Ak si nie ste celkom istý, kľudne nám napíšte alebo zavolajte, radi pomôžeme.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.