Eshop roka 2025 s vykurovacou technikou

EVOLUTION - 2" FM; pallo-hanan korkki FIV.80004 P

Mã số: 80004200
Chưa được đánh giá Chi tiết đánh giá
107,50 € –20 %
Vykurovacia technika Guľový uzáver voda EVOLUTION - 2"FM; páčka
107,50 € –20 % 86 € / Cái 69,92 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili EVOLUTION, FIV.80004 P, koko: 2" FM, pakkaus: 4 kpl pussiin / 16 kpl laatikossa
- pidennetty kierre
 
  • PN 16
  • T = -20 °C - +120 °C
  • sisäinen - ulkoinen kierre FM, vivuvaihtoehto
  • kaksipuolisesti pidennetty kierre, täysi virtaus
  • materiaali nikkelöity messinki CW617N
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen laippa/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmän todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laippa/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluu jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: Sisä- ja ulkohanat
Bảo hành: 2 năm
Trọng lượng: 1.81 kg
Materiaali: nikkelöity messinki CW617N ATEST juomavedelle
Käytännön lämpötila: -20 °C
Venttiilin tyyppi: palloventtiili / pallohana
Kierteen koko: 2"
Liitäntätyyppi: sisäkierre × ulkokierre
Mäntäispaine: PN 16
Posledná aktuálizacia ceny: 13.04.2026 1:04:02

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 03.11.2026 15:31
Hej hej, jag funderar på om denna kulvertätsventil i storlek 2" FM med förlängd tråd är kompatibel med en befintlig rörledning av koppar, och huruvida jag som hobbybyggare får installera den själv eller om det krävs en yrkesman för att säkerställa att den fungerar korrekt vid temperaturer upp till +120 °C?
A avatar của tác giả 03.11.2026 15:31
Ja, ventilen är gjord av nicklad kopparlegering och passar bra för kopparledningar. Eftersom detta är en enkel sluten armatur utan komplexa regleringsfunktioner kan du installera den själv, men vi rekommenderar alltid att en yrkesman gör arbetet om det gäller säkerhetskomponenter. Tänk bara på att PN 16 och temperaturområdet -20 till +120 °C stämmer överens med ditt system innan du beställer.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.