Eshop roka 2025 s vykurovacou technikou

EVOLUTION - 1/2" FM; butterfly ball valve FIV.80004 M

Mã số: 80004013
Chưa được đánh giá Chi tiết đánh giá
11,39 € –20 %
Vykurovacia technika Guľový uzáver voda EVOLUTION - 1/2"FM; motýľ
11,39 € –20 % 9,11 € / Cái 7,41 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (7 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

FM-kierteellä varustettu EVOLUTION-palloventtiili, FIV.80004 M, koko: 1/2" FM, pakkaus: 36 kpl pussia kohti / 144 kpl laatikkoa kohti
- pidennetyllä kierteellä
 
  • PN 50 
  • T = -20 °C – +120 °C
  • sisäinen – ulkoinen FM-kierre, perhonen muotoilu
  • kaksipuolisesti pidennetyt kierteet, täysi virtaus
  • materiaali nikkelöity messinki CW617N
  • JUOMAVEDEN ATEST, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa – niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on oltava putken halkaisijan mukainen.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä – yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotona, mutta säätö- ja turva-venttiilien (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa tehdä ammattilaisella, koska ne ovat turvallisuustoimintoisia komponentteja.

Các thông số bổ sung

Danh mục hàng: Sisä- ja ulkoperhoset
Bảo hành: 2 năm
Trọng lượng: 0.18 kg
Venttiilin tyyppi: palloventtiili / pallohana
Kierteen koko: 1/2"
Liitäntätyyppi: sisäkierre × ulkokierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:54

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

T avatar của tác giả 02.11.2026 09:55
Tål den här ventilen att sitta kvar vid 120 grader kontinuerligt, eller gäller det bara korta toppar? Ska användas på en värmeslinga med ganska hög drifttemperatur och vill inte byta ventil om ett år.
A avatar của tác giả 02.11.2026 09:55
PN 50 och temperaturområdet -20°C till +120°C gäller som arbetsområde för ventilen, inte bara korta toppar, så den klarar kontinuerlig drift inom dessa värden. Materialet är nicklad kopparlegering CW617N, godkänt för dricksvatten. Om systemet ligger nära 120°C konstant, se bara till att även övriga komponenter i slingan (rör, kopplingar) är dimensionerade för samma tryck och temperatur. Har du en liknande installation med högre tryck också, kan det vara värt att titta på vårt sortiment av kulventiler med högre PN-klass.
L avatar của tác giả 09.10.2026 19:01
Zajímalo by mě, zda je tato koule s prodlouženým závitem FM vhodná pro připojení na potrubí o průměru 1/2 palce a jaká je maximální provozní teplota, kterou může armatura bezpečně snášet?
A avatar của tác giả 09.10.2026 19:01
Ano, tento model je přímo určen pro rozměr 1/2 palce a má prodloužený závit. Co se týče teploty, vydrží provoz v rozmezí od mínus dvaceti do plus sto dvaceti stupňů Celsia. Pro jistotu doporučujeme vždy zkontrolovat, zda parametry odpovídají vašemu systému.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.