Eshop roka 2025 s vykurovacou technikou

Esteettinen suojus - 80 mm; 2 kpl; valkoinen IVAR.FL 157

Mã số: LC0157II
Chưa được đánh giá Chi tiết đánh giá
79,09 € –20 %
Vykurovacia technika Estetický kryt -  80mm; sada 2ks; biely
79,09 € –20 % 63,27 € / Cái 51,44 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Esteettinen jalusta - valkoinen; paketti

  • esteettiset kannet fancoilien alle, esimerkiksi piilottaakseen syöttöputken lattiasta

Usein kysyttyä

  • Kuinka tarkistan, että tuote sopii järjestelmääni? Vertaa kuvauksessa mainittuja mittoja, materiaaleja ja teknisiä ominaisuuksia järjestelmäsi vaatimuksiin. Epäselvyyksissä ota meihin yhteyttä tarkan kuvauksen järjestelmäsi kytkennöistä.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien osien asennus onnistuu myös taitavalta kotityöläiseltä, kaasu-, sähkö- tai painejohtojen asennuksissa suosittelemme aina ammattimaisen teknikon apua.

Các thông số bổ sung

Danh mục hàng: IVAR.FL157 - esteettiset suojukset
Bảo hành: 24
Tyyppi: tarvikkeet
Posledná aktuálizacia ceny: 13.04.2026 1:03:04

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 01.11.2026 21:51
Passar locket till ett 80 mm inloppsrör rakt av, eller behöver jag mäta något mer än diametern innan jag beställer? Måste jag fixa montering själv eller krävs fackman för detta?
A avatar của tác giả 01.11.2026 21:51
Locket är dimensionerat för 80 mm rör, så stämmer diametern på ditt inloppsrör ska det passa bra. Jämför gärna ändå mått och material mot ditt system innan köp - är du osäker, maila oss med exakt beskrivning av din anslutning så kollar vi. Själva monteringen av täcklocket är enkel och klaras normalt utan yrkesman, det är bara vid arbeten med gas, el eller tryckförsörjning vi rekommenderar att en fackman kopplas in.
G avatar của tác giả 01.09.2026 10:18
Ezek a krytek 80mm-es csőre mennek, de nem egyértelmű, hogy ez a belső vagy a külső átmérőre vonatkozik. Melyikre kell érteni?
A avatar của tác giả 01.09.2026 10:18
A 80mm itt a kryt átmérőjére vonatkozik, vagyis arra a lyukra illik, amit a cső körül a falon vagy padlón el szeretnél fedni. Ha a csőre magára illesztenéd, az általában kisebb méretű. Érdemes a falban lévő nyílást lemérni, mielőtt megrendeled.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.