Eshop roka 2025 s vykurovacou technikou

Elektromagnetinen venttiili kierteellä lämmityskaasuille - 6/4""; PN 6; NC; alumiini IVAR.M16-RM

Mã số: CM06C0000008
Chưa được đánh giá Chi tiết đánh giá
380,07 € –20 %
Vykurovacia technika Elektromagnetický ventil závitový pre vykurovacie plyny - 6/4"; PN 6; NC; hliník
380,07 € –20 % 304,06 € / Cái 247,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Elektromagneettinen venttiili - kierteinen, IVAR.M16-RM, koko: 6/4"; PN 6; NC; alumiini, pakkaus: 1 kpl
- käsikäyttöisellä avauksella

 

  • maksimityöpaine 500 mbar ja PN 6
  • T = -20 °C - +60 °C
  • syöttöjännite 230 V, 50/60 Hz, suojausluokka IP65
  • maakaasun, hiilimonoksidin ja propaanin syötön sulkemiseen kaasupitoisuussensorin signaalin perusteella tai sähkökatkon sattuessa
  • ei virtaa venttiili suljettu - NC, käsikäyttöinen venttiilin avaus
  • materiaali painevalu alumiini
  • yhteensopiva STN EN 161 kanssa

 

Huomio: Tilaustuote 12 V ja 24 V/50 Hz syöttöjännitteellä.

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka käyttötarkoitus (vesi-, lämmitys-, kaasu-, aurinkoputkistot, paineilmasyöttö jne.) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niille on sertifioitu eri väliaineet.
  • Miten tämä putki liitetään? Tavallisesti puristusliittimillä (press) tai hitsatuilla liitoksilla, riippuen järjestelmästä ja halkaisijasta - käytä yhteensopivia saman järjestelmän putkiosia.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilmasyöttö- tai hitsattujen liitosten asennus on varattava henkilölle, jolla on asianmukainen ammattitaito.

Các thông số bổ sung

Danh mục hàng: IVAR.M16-RM,RMO,RMP,RMOP - sähkömagneettiventtiilit
Bảo hành: 2 năm
Trọng lượng: 1.876 kg
Kierteen koko: 6/4"
Tuotteen tyyppi: magneettiventtiili
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:08:02

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 11.10.2026 08:53
Ciao, ho bisogno di collegare questa valvola a un impianto gas esistente con raccordi press; posso usarla o serve per forza saldatura? Inoltre, in caso di blackout elettrico rimane chiusa o si apre?
A avatar của tác giả 11.10.2026 08:53
Ciao Alessandro, per il collegamento puoi usare giunzioni a pressione purché i raccordi siano compatibili col sistema e del diametro giusto. Riguardo al blackout, essendo una valvola NC (Normalmente Chiusa), in assenza di corrente rimane automaticamente chiusa per sicurezza. Ricorda comunque che l'installazione su impianti gas va fatta da un professionista qualificato.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.