Eshop roka 2025 s vykurovacou technikou

EK-tyyppinen liitoskorkki; nikkeli IVAR.AC 4601 N

Mã số: 550090
Chưa được đánh giá Chi tiết đánh giá
3,58 € –20 %
Vykurovacia technika Viečko armatúry typu EK; nikel
3,58 € –20 % 2,86 € / Cái 2,33 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (3 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.AC 4601 N -tyyppinen venttiilin korkki, IVAR.AC 4601 N, pakkaus: 100 kpl pussia kohti / 800 kpl laatikkoa kohti

 

 

Huomio: Vain IVAR-jakotukkeille.

Usein kysyttyä

  • Miten valita oikean kokoinen putkiosa? Kierreruuvin mitta on oltava tarkalleen sama kuin putkessa tai venttiilissä, johon se kiinnitetään - FF (sisäinen-sisäinen kierre) ja MF (ulkoinen-sisäinen) lyhenteet nimen yhteydessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivistysmateriaalia tarvittu asennuksessa? Kyllä, kierreliitoksissa käytetään standardisti teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaiset kierreliitokset onnistuvat perustaidoilla myös kotityöläiseltä, mutta jos joudutaan tekemään toimivaan putkistoon (erityisesti kaasuputkeen), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: EK-tyyppisten venttiilien tulpat
Bảo hành: 2 năm
Trọng lượng: 0.038 kg
Liittimen tyyppi: tulppa / kansi
Liitäntätyyppi: eurokartio (EK)
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:11:01

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

N avatar của tác giả 08.10.2026 09:05
Good morning, does this nickel cap fit my existing IVAR manifold with Eurocone outlets?
A avatar của tác giả 08.10.2026 09:05
Yes, it is designed specifically as a plug for Eurocone (EK) outlets on IVAR manifolds. Just ensure the thread size matches exactly and use PTFE tape or hemp fibre with sealing paste to guarantee a tight joint. It is made of nickel-plated brass CW617N and works up to 120 °C.
M avatar của tác giả 14.01.2022 15:36
Dobrý deň, potrebujem kúpiť Zátky R5/4" DIN 2999, akosť 14301 a zátky M 18x1,5, DIN 2999, akosť 1.4301.
A avatar của tác giả 14.01.2022 15:36
Dobrý deň, uvedené zátky v ponuke nemáme.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.