Eshop roka 2025 s vykurovacou technikou

Dynaaminen termostaattinen venttiili esiasetuksella - 1/2" x EK; kulma IVAR.VS 2106 NH

Mã số: 501185
Chưa được đánh giá Chi tiết đánh giá
67,40 € –20 %
Vykurovacia technika Dynamický termostatický ventil s prednastavením - 1/2" x EK; rohový
67,40 € –20 % 53,92 € / Cái 43,84 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Dynaaminen termostaattinen venttiili esiasetuksella, IVAR.VD 2106 NH, koko: 1/2" x EK, pakkaus: 10 pussia / 40 laatikkoa
- kulma
 

Usein kysyttyä

  • Miten valita oikea laite/venttiilin tyyppi ja koko? Ohjaa nimellispainetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitäntäkoko on sovitettava putken halkaisijaan.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska ne ovat turvallisuustoimintoisia.

Các thông số bổ sung

Danh mục hàng: Klassiset sarjat, EK dynamic
Bảo hành: 2 năm
Trọng lượng: 0.27 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:14

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Z avatar của tác giả 05.11.2026 21:19
Dzień dobry, czy ten zawór da się zamontować bezpośrednio do rur z miedzi lub ALPEX, czy muszę dokupować osobno jakieś przejściówki?
A avatar của tác giả 05.11.2026 21:19
Tak, zawór jest przystosowany do połączenia z rurami miedzianymi i plastikowymi, ale wymaga użycia dedykowanych śrub IVAR.TR dla miedzi lub IVAR.TA dla ALPEX. Są to niezbędne elementy montażowe, które zapewniają szczelność w tym konkretnym systemie. Warto też sprawdzić inne produkty z kategorii zestawów klasycznych, jeśli szukasz kompletnego rozwiązania pod kątem materiałów.
G avatar của tác giả 24.08.2026 15:43
Hi there, I have old radiators at home and I want to control the heat better in each room, but I have no idea about these things – is this valve something that just fits onto a regular radiator, or do I need some special type of radiator to use it?
A avatar của tác giả 24.08.2026 15:43
Good news – this is a thermostatic valve that connects to a standard radiator, so in most cases it will fit on what you already have at home. It's a corner-style valve with a 1/2" connection, which is the most common size in older installations. If you're not sure about your setup, it's always worth having a plumber take a quick look before ordering.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.