Eshop roka 2025 s vykurovacou technikou

Dynaaminen termostaattinen venttiili - 1/2" x EK; oikea; kolmiakselinen IVAR.VCD 2166 NH DX

Mã số: 500512
Chưa được đánh giá Chi tiết đánh giá
67,40 € –20 %
Vykurovacia technika Dynamický termostatický ventil s prednastavením - 1/2" x EK; pravý; trojosový
67,40 € –20 % 53,92 € / Cái 43,84 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Dynaaminen termostaattinen venttiili esiasetuksella, IVAR.VCD 2166 NH DX, koko: 1/2" x EK, pakkaus: 10 pussia / 40 laatikkoa
- kolmiulotteinen, oikea
 

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Valitse laite/venttiili käyttämällä nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotona, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa tehdä ammattilaisen toimesta, koska ne ovat turvallisuustoimintoisia.

Các thông số bổ sung

Danh mục hàng: Kolmisuuntainen - klassinen liitäntä, EK
Bảo hành: 2 năm
Trọng lượng: 0.282 kg
Kierteen koko: 1/2"
Tyyppi: termostaattiventtiili
Venttiilin malli: kolmiakselinen
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:26

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 16.11.2026 10:12
Dobrý deň prajem, chcel by som sa opýtať, či je tento dynamický termostatický ventil IVAR.VCD 2166 NH DX vhodný pre pripojenie na plastové potrubie a aké sú maximálne prevádzkové parametre tlaku a teploty, aby som si bol istý jeho bezpečnou funkciou v mojom systéme.
A avatar của tác giả 16.11.2026 10:12
Áno, tento ventil je určený aj pre plastové potrubie, ktoré sa k nemu pripája pomocou zverných šróbení IVAR.TP. Maximálny menovitý tlak je PN 10 a prevádzková teplota dosahuje až 120 °C. Pre presné nastavenie prietoku má prednastaviteľnú hodnotu Kv a hlavicu s rozmerom M 30 x 1,5.
V avatar của tác giả 26.10.2026 12:17
Trebam li za ovaj ventil kupiti posebne cijevi ili radi s onim običnim bakrenima i plastom koje imamo?
A avatar của tác giả 26.10.2026 12:17
Ovaj ventil se može spojiti na bakrene, ALPEX ili plastične cijevi uz pomoć naših IVAR pričvršćivača. To znači da nije nužno tražiti neku specifičnu vrstu cijevi, već samo odgovarajući spojnik za vaš materijal. Proizvod je dizajniran da funkcionira s tim različitim tipovima vodova.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.