Eshop roka 2025 s vykurovacou technikou

DOSAPHOS-suhteellinen annostelija - 3/4" GEL.DOSAPHOS 600

Mã số: 105.070.10
Chưa được đánh giá Chi tiết đánh giá
236,16 € –20 %
Vykurovacia technika preporcionálny dávkovač DOSAPHOS - 3/4"
236,16 € –20 % 188,93 € / Cái 153,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

GEL.DOSAPHOS 600 - Proporcionaalinen annostelija, koko: 3/4"

 
  • PN 6, T = +5 °C - +40 °C
  • proporcionaalinen annostelija vedenkalkkiutumisen riskin vähentämiseen
  • ei sovellu kovetetun veden käsittelyyn (suositeltu enimmäiskovuus 2,0 mmol/l)
  • lämminvesikäyttöön
  • annostus max. 3,5 mg/l
  • maksimivirtaus 5,8 m³/h
  • pakkaus sisältää: 0,5 kg GEL.GELPHOS P -täyteainetta
  • materiaali: pää - niklattu messinki, säiliö - SAN
  • aktiivisen aineen valmistus suoraan säiliössä
  • yksinkertainen täyteaineen vaihto
 
Huomio: 1 kg täyteaine riittää noin 100 - 120 m³.
 
 
VÄHENTÄÄ VEDENKALKKIUTUMISEN RISKIÄ

Usein kysyttyä

  • Kuinka usein suodatin/suodatinpatruuna on vaihdettava tai puhdistettava? Aikataulu riippuu veden laadusta ja käyttöintensiteetistä - suosittelemme säännöllistä silmämääräistä tarkastusta ja puhdistusta/vaihtoa valmistajan ohjeiden mukaan tai näkyvän virtauksen laskun yhteydessä.
  • Mihin suodatin asennetaan? Yleensä veden pääsyöttöön kiinteistöön, ennen herkkiä laitteita (kattila, vesijärjestelmä) siten, että se suojaa koko järjestelmää epäpuhtauksilta.
  • Onko asennuksen suoritettava ammattilainen? Vedenjakelujärjestelmän liittäminen suositellaan jätettäväksi putkimiehen tehtäväksi, erityisesti jos se edellyttää olemassa olevan putken katkaisua.

Các thông số bổ sung

Danh mục hàng: Kemiallinen ja fysikaalinen vedenkäsittely
Bảo hành: 2 năm
Trọng lượng: 1.948 kg
EAN: 8018244096323
Tyyppi: annostelija / pumppu
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:32

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 23.01.2022 19:23
Potrebujem poradit ohladom odvápnujuceho cerpadla.Potrebujem odvápnit rozvode teplej vody v bytovom dome,takže niečo výkonnejšie.
A avatar của tác giả 23.01.2022 19:24
Dobrý deň, ak myslíte kammak áno je len pre veľkoobchodných odberateľov a nachádza sa tam popis. V prípade, že máte záujem treba si ho objednať e-mailom alebo priamo na veľkoobchodnom e-shope a doba dodania je 6-8 týždňov. Pekný deň.
R avatar của tác giả 23.01.2022 19:23
Dobrý den,Dakujem .Inak máte ho v ponuke pre VO
A avatar của tác giả 23.01.2022 19:23
Dobrý deň, mrzí ma to, ale s týmto Vám neporadíme. Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.