Eshop roka 2025 s vykurovacou technikou

Kierteinen ruostumattomasta teräksestä valmistettu suodatin - sarjalle BRA.10.000 - 6/4"; L=120 mm; PTFE BRA.10.000

Mã số: 10000112
Chưa được đánh giá Chi tiết đánh giá
173,43 € –20 %
Vykurovacia technika Filter závitový nerez - pre série BRA.10.000 - 6/4"; L=120mm; PTFE
173,43 € –20 % 138,74 € / Cái 112,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kierteinen suodatin - ruostumaton teräs, BRA.10.000, koko: 6/4", pituus: 120 mm
 
  • max. paine 40 bar, kierteillä 1/4" aina 2 1/2" F/F mukaan ISO 228-1
  • T = -20 °C - max. +200 °C
  • lämmitys- ja ilmastointijärjestelmät (HVAC), vesijohdot, pumppuasemat, öljyt ja hiilivedyt, kemian- ja elintarviketeollisuus
  • materiaali - runko: ruostumaton teräs A351 CF8M, suodatinverkko: ruostumaton teräs AISI 316, tiiviste: PTFE
  • huokoisuus 1 mm
  • käyttö veteen, jossa on jopa 50 % glykoleja
  • ei sovellu höyryyn
  • Juomaveden laatusertifikaatti

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on oltava vähintään todelliset käyttöolosuhteet järjestelmässäsi, ja liitoskoko on oltava putken halkaisijan mukainen.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska ne ovat turvallisuustoimintoja.

Các thông số bổ sung

Danh mục hàng: BRA.10.000 - Ruostumattomasta teräksestä valmistetut kierretulpat
Bảo hành: 2 năm
Trọng lượng: 1.093 kg
Venttiilin tyyppi: suodatin / seula
Rungon materiaali: ruostumaton teräs
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:02:50

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 29.10.2026 13:53
Salve, vorrei sapere se questo filtro da 6/4" con setaccio in acciaio inox 316 è adatto per un impianto che utilizza acqua mista a glicoli (fino al 50%) e se la temperatura massima di 200°C è sufficiente per le nostre condizioni operative.
A avatar của tác giả 29.10.2026 13:53
Ciao Andrea, sì, il prodotto è perfetto perché è specificamente indicato per acqua con contenuto fino al 50% di glicoli e resiste fino a +200 °C. Ricorda solo che non va usato per vapore e che le dimensioni dei filetti devono corrispondere ai tubi del tuo impianto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.