Eshop roka 2025 s vykurovacou technikou

Vaihtoehtoinen suodatuspatruuna - sarjalle BRA.11.000 ja BRA.11.000 M - DN 250 BRA.11.000 FV

Mã số: 100009CRI05F1C
Chưa được đánh giá Chi tiết đánh giá
734,31 € –20 %
Vykurovacia technika Náhradná filtračná vložka - pre sériu BRA.11.000 a BRA.11.000 M - DN 250
734,31 € –20 % 587,45 € / Cái 477,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Vaihtoehtoinen suodatinpatruuna - sarjalle BRA.11.000 ja BRA.11.000 M - DN 250

  • max. paine 16 bar DN 32 - 200; 10 bar DN 250 - 350
  • asennus laippojen väliin PN16 mukaan STN EN 1092-1
  • T = -10 °C - max. +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdoille, pumppuasemille
  • materiaali - runko, kansi: valurauta GJL 250, suodatinverkko: AISI 304, tiiviste: EPDM
  • huokoisuus koosta riippuen 0,8 - 1,6 mm, mukana irrotusruuvi
  • käyttö veteen, jossa on enintään 50 % glykolia
  • ei sovellu höyryyn, kaasuihin ja öljyjä tai hiilivetyjä sisältäviin nesteisiin

Usein kysyttyä

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa asiantuntijalle, koska ne ovat turvallisuustoimintoisia laitteita.

Các thông số bổ sung

Danh mục hàng: Laipalliset suodattimet
Materiaali: - runko
Nimellishalkaisija (DN): DN 250 tai suurempi
Venttiilin tyyppi: patruuna / varaosa
Rungon materiaali: valurauta
Materiaali - runko, kansi: valurauta GJL 250, siivilä: AISI 304, tiiviste: EPDM
Hinnan viimeisin päivitys: 13.04.2026 1:05:32

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

N avatar của tác giả 09.11.2026 14:55
Mohli by ste mi láskavo potvrdiť, aký je maximálny prevádzkový tlak tejto filtračnej vložky pri použití vo filtri DN 250, a z akého materiálu je vyhotovené sitko? Zároveň by som rád vedel, či je vložka vhodná aj pre systémy s obsahom glykolu.
A avatar của tác giả 09.11.2026 14:55
Pri DN 250 je vložka dimenzovaná na max. 10 bar, čo je nižšie ako pri menších DN 32-200, kde je to 16 bar. Sitko je z nerezu AISI 304, s priepustnosťou podľa dimenzie 0,8 až 1,6 mm. Pre vodu s obsahom glykolu do 50 % je vložka v poriadku, akurát nie je vhodná pre paru, plyny ani kvapaliny s olejmi či uhľovodíkmi.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.