Eshop roka 2025 s vykurovacou technikou

Vaihtohila - sarjalle BRA.11.000 ja BRA.11.000 M - DN 150 BRA.11.000 FV

Mã số: I060009CRI05F1C
Chưa được đánh giá Chi tiết đánh giá
234,93 € –20 %
Vykurovacia technika Náhradná filtračná vložka - pre sériu BRA.11.000 a BRA.11.000 M - DN 150
234,93 € –20 % 187,94 € / Cái 152,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Vaihtohila - sarjalle BRA.11.000 ja BRA.11.000 M - DN 150

  • max. paine 16 bar DN 32 - 200; 10 bar DN 250 - 350
  • asennus laippojen väliin PN16 mukaan STN EN 1092-1
  • T = -10 °C - max. +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, pumppuasemat
  • materiaali - runko, kansi: valurauta GJL 250, suodatinverkko: AISI 304, tiiviste: EPDM
  • huokoisuus koosta riippuen 0,8 - 1,6 mm, mukana irrotuksen ruuvi
  • käyttö vedelle, jossa on enintään 50 % glykoleja
  • ei sovellu höyrylle, kaasuille ja öljyjä tai hiilivetyjä sisältäville nesteille

Usein kysyttyä

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Ohjaa nimellispainetta (PN) ja käyttölämpötilaa (T) teknisistä tiedoista - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa tehdä ammattilaisella, koska ne ovat turvallisuustoimintoisia.

Các thông số bổ sung

Danh mục hàng: Laipalliset suodattimet
Materiaali: - telo
Nimellishalkaisija (DN): DN 150
Venttiilin tyyppi: patruuna / varaosa
Rungon materiaali: valurauta
Materiaali - runko, kansi: liatina GJL 250, sitko: AISI 304, tesnenie: EPDM
Posledná aktuálizacia ceny: 13.04.2026 1:02:36

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.