Eshop roka 2025 s vykurovacou technikou

Kierteinen ruostumattomasta teräksestä valmistettu suodatin - sarjalle BRA.10.000 - 2 1/2" BRA.10.000

Mã số: 10000212
Chưa được đánh giá Chi tiết đánh giá
517,83 € –20 %
Vykurovacia technika Filter závitový nerez - pre série BRA.10.000 - 2 1/2"; L=167mm; PTFE
517,83 € –20 % 414,26 € / Cái 336,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kierteinen suodatin - ruostumaton teräs, BRA.10.000, koko: 2 1/2", pituus: 167 mm
 
  • maksimipaine 40 bar, kierteillä 1/4" aina 2 1/2" F/F mukaan ISO 228-1
  • T = -20 °C aina max. +200 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, pumppuasemat, öljyt ja hiilivedyt, kemian- ja elintarviketeollisuus
  • materiaali - runko: ruostumaton teräs A351 CF8M, suodatinverkko: ruostumaton teräs AISI 316, tiiviste: PTFE
  • huokoisuus 1 mm
  • käyttö veteen, jossa on jopa 50 % glykolia
  • ei sovellu höyryyn
  • JUOMAVESIATEST

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotitalousmestarilta, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa asiantuntijalle, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: BRA.10.000 - Ruostumattomasta teräksestä valmistetut kierretulpat
Bảo hành: 2 năm
Trọng lượng: 5 kg
Venttiilin tyyppi: suodatin / seula
Rungon materiaali: ruostumaton teräs
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:06:49

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 22.10.2026 09:25
Dobre, ten filter je pre vykurovanie, ale chcel by som ho dať do systému, kde je voda s nejakým tým glykolom. Vydrží to? A sú tam tie závitne na 2 a pol palca?
A avatar của tác giả 22.10.2026 09:25
Áno, tento model zvládne vodu až s 50 % obsahom glykolu, takže je to v poriadku. Závit má presne 2 1/2" a sedí aj na menšie rozvody od 1/4". Je vyrobený z nerezovej ocele, takže je odolný voči chemikáliám v takýchto systémoch.
R avatar của tác giả 31.08.2026 09:44
Chcem si kúpiť tento filter, ale neviem či mi pasuje na potrubie čo mám doma - ako zistím či mám správnu veľkosť? Ten 2 1/2" mi nič nehovorí.
A avatar của tác giả 31.08.2026 09:44
Veľkosť 2 1/2" sa vzťahuje na závit potrubia, nie na vonkajší priemer rúry. Najjednoduchšie je pozrieť sa na existujúce tvarovky alebo ventily pri potrubí, kde býva veľkosť vyrazená alebo môžete odmerať vonkajší priemer rúry a porovnať s tabuľkou závitov. Ak si nie ste istý, odporúčame sa poradiť s inštalatérom, aby ste si boli istí pred objednávkou.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.