Eshop roka 2025 s vykurovacou technikou

Automaattinen täyttöventtiili - 1/2" IVAR.ADV 850

Mã số: I00200614
Đánh giá trung bình của sản phẩm là 5,0 trên 5 sao. 1 đánh giá Chi tiết đánh giá
104,18 € –20 %
Vykurovacia technika Automatický dopúšťací ventil  - 1/2"
104,18 € –20 % 83,34 € / Cái 67,76 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (3 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Automaattinen täyttöventtiili, IVAR.ADV 850, koko: 1/2", versio: mittarilla

 

  • PN 10, T = +40 °C
  • säätöalue 0,3 - 4 bar
  • suurin veden virtaus 1,8 m3/h
  • mittarivälin alue 0 - 4 bar
  • materiaali messinki CW617N

 

Sisältää:

Các thông số bổ sung

Danh mục hàng: automaattiset täyttöventtiilit
Bảo hành: 2 năm
Trọng lượng: 0.584 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:51

Đánh giá sản phẩm

Đánh giá trung bình của sản phẩm là 5,0 trên 5 sao. 1 đánh giá
5
1x
4
0x
3
0x
2
0x
1
0x

Để lại đánh giá

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Danh sách các đánh giá

5
P avatar của tác giả Đánh giá sản phẩm là 5 trên 5 sao. 21.11.2021
S ventilom som zatiaľ spokojny svoju funkciu si plní k spokojnosti
DS avatar của tác giả Dorota Sugarova Người quản lý 23.11.2021
Ďakujeme sme radi, že ste spokojný :)

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

F avatar của tác giả 27.10.2026 12:09
Ich benötige ein automatisches Absperrventil für eine Heizungsanlage mit einem maximalen Systemdruck von 3,5 bar und einer Temperatur von 38 °C. Bitte bestätigen Sie mir schriftlich, ob das IVAR.ADV 850 in der Ausführung mit Manometer PN 10 diese Betriebsbedingungen sicher abdeckt und welche maximale Wasserdurchflussmenge bei diesem Modell gewährleistet ist.
A avatar của tác giả 27.10.2026 12:09
Das IVAR.ADV 850 passt genau zu Ihren Anforderungen, da es einen Regelbereich von 0,3 bis 4 bar hat und für Temperaturen bis +40 °C ausgelegt ist. Die maximale Wasserdurchflussmenge beträgt dabei 1,8 m³/h, was für Ihre Anlage ausreicht. Weitere Details zur Kategorie finden Sie im Bereich der automatischen Nachfüllventile.
M avatar của tác giả 07.09.2026 14:09
Chcem si doplniť vodu do kúrenia, lebo mi vraj tlak klesá, ale neviem ako na to - dá sa to urobiť aj bez toho aby som musel zakaždým volať inštalatéra?
A avatar của tác giả 07.09.2026 14:09
Presne na toto slúži tento ventil - po nainštalovaní dopĺňa vodu do systému sám automaticky, keď tlak klesne. Nemusíte nič robiť ručne ani volať nikoho. Montáž ale odporúčame nechať na inštalatéra, ktorý ho správne zapojí do vašej vykurovacej sústavy.
M avatar của tác giả 31.08.2026 18:55
Mám doma kotol a kamarát mi hovoril, že by som mal dať nejakú vec, čo sama doleje vodu do systému keď jej ubúda. Je toto presne to čo hľadám alebo je to niečo iné?
A avatar của tác giả 31.08.2026 18:55
Áno, presne na to tento ventil slúži – keď tlak v kúrení poklesne, automaticky dopustí vodu, aby ste to nemuseli riešiť ručne. Pripája sa na 1/2" závit, čo je štandardná veľkosť, takže by to malo pasovať k bežnému domácemu kotlu. Ak si nie ste istý inštaláciou, odporúčame nechať to na kúrenára.
R avatar của tác giả 18.01.2022 08:57
Dobry den chcel by som sa spytat na automaticky dopustaci ventil ivar adv 850 mozem ho napojit na ked mame privodny tlak vody 0,8bar. Dakujem
A avatar của tác giả 18.01.2022 08:58
Dobrý deň, áno, samozrejme môžete. Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.