Eshop roka 2025 s vykurovacou technikou

Asunnon mittasarja EQUICOMPACT - veden mittaukseen - Qn 1,5m3; kylmä vesi IVAR.MC34A

Mã số: 506629S
Chưa được đánh giá Chi tiết đánh giá
100,25 € –20 %
Vykurovacia technika Bytová meracia sada EQUICOMPACT - k odpočtu vody - Qn 1,5m3; studená voda
100,25 € –20 % 80,20 € / Cái 65,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.MC34A
 
  • PN 10, T = +3 °C až +90 °C
  • asuinpaikan mittasarja on tarkoitettu kylmän/lämpimän veden kulutuksen mittaamiseen keskusjakelusta
  • sarja sisältää: asennuspidikkeet, 2 kpl / 4 kpl palloventtiilit tulo- ja lähtöliittimissä
  • liitäntäkierre ulkoinen 3/4” M

Valinnaiset lisävarusteet:

  • lämpimän ja kylmän veden mittari IVAR.009
  • lämpimän ja kylmän veden mittari kauko-luennalla IVAR.WFK, IVAR.WFW

Huomio:

  • sarja on tarkoitettu täydentämään asuinpaikan mittasarjaa lämpöenergian mittaamiseen IVAR.EQCP

Usein kysytyt kysymykset

  • Mihin tätä mittasarjaa käytetään? Mittari- ja kattilajärjestelmät mahdollistavat lämmön- tai vedenkulutuksen seurannan (ja asuinpaikan mittasarjojen kohdalla myös suhteellisen kustannusten jakamisen) tietyssä piirissä tai asunnossa.
  • Onko asennus ja lukeminen tehtävä ammattilaisen toimesta? Kyllä, mittasarja on asennettava ja mahdollinen virallinen tarkastus/kalibrointi (laskutusmittauksen yhteydessä) on suoritettava henkilöllä, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: EQUICOMPACT asuntomittauspaketit – kylmän ja lämpimän veden kulutuksen laskemiseen
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 25.06.2026 7:33:28

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 14.11.2026 21:16
Hello, can I use this set with the IVAR.WFK remote reading meter for my cold water sub-metering?
A avatar của tác giả 14.11.2026 21:16
Yes, this set is compatible with the IVAR.WFK hot and cold water meter that has a remote reading option. Just remember that installation and official verification must be done by an authorized professional. You can find other compatible meters in the same category on our site.
J avatar của tác giả 21.10.2026 22:42
Ich habe ein altes Rohr mit 3/4 Zoll und frage mich, ob das hier passt oder ob ich noch was kaufen muss? Passt das auch für warmes Wasser in der Wohnung?
A avatar của tác giả 21.10.2026 22:42
Ja, der Anschluss ist extern mit 3/4 Zoll Gewinde ausgeführt, also sollten Sie direkt anschließen können. Das Kit misst sowohl kaltes als auch warmes Wasser im Bereich von +3 bis +90 Grad Celsius. Bitte beachten Sie, dass die Installation unbedingt durch einen Fachmann erfolgen muss.
T avatar của tác giả 14.09.2026 11:55
Tisztelettel érdeklődöm, hogy ez a mérőkészlet egy meglévő, szabványos DN15-ös csőrendszerbe közvetlenül beépíthető-e, vagy szükség van hozzá valamilyen kiegészítő idomra, esetleg átalakításra? Előzetesen tájékoztatnám Önöket, hogy a szóban forgó lakásban a vízóra cseréjét saját kivitelezésben tervezzük elvégezni.
A avatar của tác giả 14.09.2026 11:55
Ez a készlet hideg vizes mérésre való, Qn 1,5 m³-es névleges átfolyással. A beépíthetőség attól függ, hogy milyen a meglévő csőcsatlakozás mérete és kialakítása – ha bizonytalan, érdemes ezt egy szerelővel előre egyeztetni, mert a készlet önmagában nem tartalmaz minden lehetséges átmeneti idomot. Ha kérdés van a konkrét méretekkel kapcsolatban, írjon bátran, megpróbálunk segíteni.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.