Eshop roka 2025 s vykurovacou technikou

Asuinrakennuksen mittarikokoonpano - ilman kaappia - lämmitys Kv 2,25; ilman mittaria IVAR.EQM 15B

Mã số: 506380
Chưa được đánh giá Chi tiết đánh giá
634,68 € –20 %
Vykurovacia technika Bytová meracia zostava - bez skrine - vykurovanie Kv 2,25; bez merača
634,68 € –20 % 507,74 € / Cái 412,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.EQM
 
  • PN 10, T = + 90 °C
  • modul IVAR.EQUIMETER asunnon mittarijärjestelmään lämpöenergian kulutuksen mittaamiseksi keskusjakelusta
  • sisältää: 3-tie vyöhykkeen säätöventtiilin, 2 kpl tasapainotusventtiilejä, lämpötila-anturin kammion, IVAR.WFM (MEGATRON 5) lämpömittarin, 2 kpl sulkuventtiilejä järjestelmän tasapainotukseen, suodattimen, 4 kpl palloventtiilejä sisään- ja ulostuloon 3/4”, asennuspohjan ja lämpöeristyksen
  • liitäntäkierre ulkoinen 3/4” M
  • materiaali messinki CB753S

Huomio:

Ennen kuin otat lämmitysjärjestelmän käyttöön, erityisesti lattialämmityksen ja patterilämmityksen yhdistelmässä, suosittelemme voimakkaasti koko järjestelmän huuhtelua valmistajan ohjeiden mukaisesti. Suosittelemme lämmitysjärjestelmän

Usein kysyttyä

  • Mihin tätä mittarijärjestelmää käytetään? Mittari- ja kattilajärjestelmät mahdollistavat lämmön tai veden kulutuksen seurannan (ja asunnon mittarijärjestelmien tapauksessa myös suhteellisen kustannusten jakamisen) tietyssä piirissä tai asunnossa.
  • Onko asennus ja lukeminen tehtävä ammattilaisen toimesta? Kyllä, mittarijärjestelmän asennus ja mahdollinen virallinen tarkastus/kalibrointi (laskutuksen mittauksessa) on suoritettava henkilöllä, jolla on asianmukainen lupa.

Các thông số bổ sung

Danh mục hàng: Asuntomittauskeskus - ilman asennusrasiaa IVAR.EQM
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:02:43

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 17.11.2026 10:27
Buongiorno a tutti, mio padre deve mettere a posto l'impianto di un appartamento in un condominio con riscaldamento centralizzato e questo set non ha il contatore, ma allora come si fa a leggere i consumi? Inoltre basta un idraulico normale o serve uno apposta per installarlo e metterlo in funzione?
A avatar của tác giả 17.11.2026 10:27
Ciao Alessandro, questo set in effetti è proposto senza contatore quindi va abbinato a parte, mentre dentro trovi già tutto il resto: valvola a 3 vie, le 2 valvole di bilanciamento, il pozzetto per il sensore di temperatura, filtro e le 4 valvole a sfera 3/4" per entrata e uscita. Per il montaggio e per l'eventuale taratura/verifica ufficiale serve comunque un tecnico specializzato, non va bene il fai da te. Se vi serve anche il contatore di calore trovate nel nostro catalogo l'IVAR.WFM compatibile con questa unità.
B avatar của tác giả 28.10.2026 09:58
Czy w składzie zestawu pomiarowego IVAR.EQM znajdują się zawory kulowe o średnicy 3/4", które są niezbędne do podłączenia go do rozdzielacza, oraz czy materiał wykonania (mosiądz CB753S) zapewnia odporność na temperaturę roboczą do +90 °C?
A avatar của tác giả 28.10.2026 09:58
Tak, zestaw zawiera dokładnie 4 zawory kulowe o gwincie zewnętrznym 3/4" i wszystkie elementy wykonane są z mosiądzu CB753S, co gwarantuje ich trwałość przy temperaturze do +90 °C. Warto jednak pamiętać, że przed uruchomieniem systemu należy go przepłukać zgodnie z instrukcją producenta, aby uniknąć uszkodzeń. Jeśli planuje Pan montaż podobnego rozwiązania w mieszkaniu, warto sprawdzić inne zestawy z naszej kategorii mieszkaniowej.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.