Eshop roka 2025 s vykurovacou technikou

Anturikaivo – 1/2"; L 150 mm IVAR.GU

Mã số: ACGUOV150
Chưa được đánh giá Chi tiết đánh giá
12,67 € –19 %
Vykurovacia technika Jímka - 1/2"; L 150mm
12,67 € –19 % 10,14 € / Cái 8,24 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (7 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Anturikaivo, IVAR.GU, koko: 1/2", L 150 mm

 

  • tarkoitettu lämpömittarin asennukseen
  • lukitusruuvilla
  • sisähalkaisija 9,5 mm
  • anturikaivon pituus 150 mm
  • ulkokierre 1/2” M
  • materiaali messinki CW617N

Usein kysyttyä

  • Miten valitsen oikean tyypin ja koon venttiilille? Noudata teknisissä tiedoissa ilmoitettua nimellispainetta (PN) ja käyttölämpötilaa (T) – niiden on vastattava järjestelmäsi todellisia käyttöolosuhteita tai ylitettävä ne, ja liitännän koon on vastattava putken halkaisijaa.
  • Miten tämä venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisinvirtaus yms.) riippuu venttiilin tyypistä – yksityiskohtaisen toimintakuvauksen löydät tämän tuotteen kuvauksesta edellä.
  • Pitääkö asennuksen tehdä ammattilainen? Yksinkertaiset sulkuventtiilit osaa asentaa myös kotikäyttäjä, mutta säätö- ja turvaventtiilien (varoventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska ne ovat turvatoiminnolla varustettuja osia.

Các thông số bổ sung

Danh mục hàng: Uppotaskut
Bảo hành: 2 năm
Trọng lượng: 0.08 kg
Kierteen koko: 1/2"
Tyyppi: anturitasku
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:09:47

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 09.11.2026 11:14
I have no idea how this thing works, but I need to put a thermometer in my pipe somehow - does this little tube just sit in the pipe and I stick the thermometer inside it, or is it more complicated than that?
A avatar của tác giả 09.11.2026 11:14
That's exactly right - you weld or screw this brass pocket into the pipe or tank, and the thermometer slides into it afterwards, so you can take it out later without draining the system. This one has a 1/2" external thread, is 150 mm long, and the inside opening is 9.5 mm, so just make sure your thermometer's sensor fits that size and has a locking screw to hold it in place. If you're not sure about fitting it into your system, it's a simple job, but if anything feels off, a plumber can sort it out in a few minutes.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.