Eshop roka 2025 s vykurovacou technikou

Adapter/transition for stainless steel flexible pipes IVAR.SITE-TR - 1/2"Mx3/8"M IVAR.SITE-VS

Mã số: M1650012
Chưa được đánh giá Chi tiết đánh giá
3,05 € –20 %
Vykurovacia technika Vsuvka/prechod - pre nerezové vlnovcové trubky IVAR.SITE-TR - 1/2"Mx3/8"M
3,05 € –20 % 2,44 € / Cái 1,98 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Liitos/siirtymä - ruostumattomille aallotoruille IVAR.SITE-TR - 1/2"Mx3/8"M

  • tarkoitettu IVAR.SITE-TR ruostumattomien aaltoputkien liittämiseen tai kytkemiseen

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen liitin/venttiili? Noudata teknisissä tiedoissa ilmoitettua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, sekä kiinnityksen mitan on vastattava putken halkaisijaa.
  • Miten tämä liitin/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Pitääkö asennuksen suorittaa ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalousmestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: Liittimet ja siirtimet
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:48

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

L avatar của tác giả 19.11.2026 07:14
Passer denne stuts direkte på IVAR.SITE-TR bølgeformet rør, eller skal jeg bruge en separat rørskærer/affaset ende først? Jeg har 3/8" gevind på min ventil og vil gerne vide om 1/2"Hun x 3/8"Han kombinationen går direkte i mellem rør og ventil uden mellemled.
A avatar của tác giả 19.11.2026 07:14
Ja, den er lavet præcis til det - 1/2" hunenden monteres på det rustfri bølgeformede rør IVAR.SITE-TR, og 3/8" hanenden skrues direkte på din ventil. Du skal altså ikke bruge yderligere mellemled, bare husk at tjekke at din ventils PN og temperatur matcher dine faktiske driftsforhold. Hvis du er i tvivl om monteringen, er det ikke noget, der kræver en professionel - det er en forholdsvis enkel fitting at sætte på.
D avatar của tác giả 22.10.2026 11:47
Kupiłem rurę IVAR.SITE-TR i nie wiem, czy ta przejściówka 1/2 cala na 3/8 cala będzie pasować do mojego zaworu, bo w ogóle nie znam się na tych średnicach. Czy to jest zwykłe połączenie czy coś bardziej skomplikowanego?
A avatar của tác giả 22.10.2026 11:47
Ta wkładka służy dokładnie do łączenia nierdzewnych rur falistych IVAR.SITE-TR o podanych wymiarach, czyli od 1/2 cala do 3/8 cala. Jeśli Twój system używa właśnie takich rur, to element powinien być kompatybilny. Przy prostszych złączkach montaż może wykonać każdy, ale przy zabezpieczeniach lepiej wezwać fachowca.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.