Eshop roka 2025 s vykurovacou technikou

Pressfitting IVAR.MP 5736 22x26/3 – adapter ALPEX 26x3 to Cu / C-STEEL Ø 22 mm

Mã số: 512117MPC
Chưa được đánh giá Chi tiết đánh giá
31,61 € –19 %
Vsuvka PRESS IVAR.MP 5736 22x26/3 – prechod z potrubia ALPEX 26x3 na rúrku Cu / C-STEEL Ø 22 mm
31,61 € –19 % 25,29 € / Cái 20,56 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Vsuvka IVAR.MP 5736 koossa 22x26/3 (koodi 512117MPC) yhdistää kaksi puristusjärjestelmää: toisella puolella monikerroksinen putki ALPEX 26x3, toisella kupariputki tai IVAR.C-STEEL -hiiliteräsputki ulkohalkaisijaltaan 22 mm. Molemmat puolet liitetään puristamalla, joten liitokseen ei tarvita kierteitettyä väliliitintä.

  • ALPEX 26x3 -puoli: puristusleuat profiililla B, BE, TH, F, H, R tai U
  • Cu / C-STEEL Ø 22 mm -puoli: puristusleuat profiililla M, V tai SA
  • max. käyttöpaine PN 10, max. lämpötila +100 °C
  • runko nikkelöityä messinkiä CW617N, holkki ruostumatonta terästä, tiiviste EPDM

Vsuvkaa käytetään kaikkialla, missä ALPEX-putki kohtaa kupari- tai teräspuristusputken samassa putkistossa. Purista jokainen puoli oikean profiilin ja koon leualla; leikkaa ALPEX-putki kohtisuoraan ennen asennusta, kalibroi ja poista terävät reunat.

Tekniset tiedot

Koodi512117MPC
ValmistajaIVAR
TyyppiIVAR.MP 5736
LajiALPEX-puristusliitin - Cu / C-STEEL
Koko22x26/3
ALPEX-puoli26x3 mm
Cu / C-STEEL -puoliØ 22 mm
Leuat - ALPEX-puoliB, BE, TH, F, H, R, U
Leuat - Cu / C-STEEL -puoliM, V, SA
Max. paine / lämpötilaPN 10 / +100 °C
Materiaaliniklattu messinki CW617N, ruostumaton holkki, EPDM-tiiviste

Usein kysyttyä

Mitä putkia 22x26/3 -liitin yhdistää?
Toisella puolella monikerroksinen putki ALPEX 26x3, toisella kupariputki tai IVAR.C-STEEL -hiiliteräsputki ulkohalkaisijaltaan 22 mm.

Mitä puristusleukoja tarvitaan?
ALPEX-puoli puristetaan leuoilla profiililla B, BE, TH, F, H, R tai U, kupari- tai teräspuoli profiililla M, V tai SA - aina putkelle sopivan koon mukaan.

Mitkä ovat liitoksen käyttörajat?
Liitin on tarkoitettu käyttöpaineeseen 10 baaria (PN 10) ja lämpötilaan +100 °C asti. Runko on nikkelöityä messinkiä CW617N, holkki ruostumatonta terästä ja tiiviste EPDM.

Các thông số bổ sung

Danh mục hàng: Suoraliittimet PRESS - kupari
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Koodi: 512117MPC
Valmistaja: IVAR
Tyyppi: IVAR.MP 5736
ALPEX-puoli: 26x3 mm
Cu / C-STEEL-puoli: Ø 22 mm
Materiaali: niklattu messinki CW617N, ruostumaton holkki, tiiviste EPDM
Laatu: crimp fitting ALPEX – Cu / C-STEEL
Mitta: 22x26/3
Leuat – ALPEX-puoli: B, BE, TH, F, H, R, U
Leuat – Cu / C-STEEL-puoli: M, V, SA
Maksimipaine / lämpötila: PN 10 / +100 °C

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.