90° press x press IVAR.IVN420 - ruostumaton teräs AISI 304, 15 mm
Mã số: IVN420.15Mô tả chi tiết sản phẩm
IVAR.IVN420-ka 15 mm-neliittimellä kääntää ruostumattoman teräsputken 90°. Molemmat puolet ovat puristusliittimiä (PRESS x PRESS) saman halkaisijan putkelle – liitin ei ole pienennetty. Runko on valmistettu ruostumattomasta teräksestä AISI 304 (1.4301), liitos tiivistää EPDM-O-rengas. Mihin putkistoihin - suljetut lämmitys- ja jäähdytyspiirit - aurinkolämpöjärjestelmät - paineilma- ja alipainejärjestelmät - inertit ja tekniset kaasut - tekniset ja prosessinesteet, teolliset sovellukset - jäte- ja sadevedet Pesuveden putkistoihin ei ole tarkoitettu. 15 mm-liitoksen puristus Liitos puristetaan M-profiililla varustetuilla puristimilla; 15 mm halkaisijalle riittävät yksittäiset puristimet. Oranssinauha liittimessä varoittaa vielä puristamattomasta liitoksesta, ja LBP (Leak Before Press) -O-rengas vuotaa painekokeessa, kunnes liitin on puristettu – näin puuttuva liitos näkyy heti. Leikkaat putken kohtisuoraan akseliin, hammastat sisä- ja ulkopuolen ja merkitset kynällä työnnön syvyyden. Asennuksessa noudata järjestelmän valmistajan asennusohjeita ja huuhtele koko järjestelmä ennen käyttöönottoa. Käyttöparametrit - Paine PN 16, alipaine -0,8 bar (absoluuttinen paine 0,2 bar) - Lämpötila -20 °C - +120 °C, jäätymisenestoaine enintään 50 % - Mitat teknisen piirustuksen mukaan: L 42 mm, Z 21 mm. Samaan sarjaan on saatavilla myös 90°-kaari yhdellä liitospäällä IVAR.IVN421. Tekniset tiedot| Koodi | IVN420.15 |
| Valmistaja | IVAR |
| Tyyppi | IVAR.IVN420 |
| Liittimen tyyppi | 90°-kaari, PRESS x PRESS, ei pienennetty |
| Putken halkaisija (d) | 15 mm |
| Materiaali | ruostumaton teräs AISI 304 (1.4301) |
| Tiiviste | EPDM-O-rengas, LBP-malli |
| Puristusindikaattori | kyllä, oranssi nauha |
| Maksimipaine | PN 16 |
| Maksimaalipaine | -0,8 bar (absoluuttinen paine 0,2 bar) |
| Käyttö lämpötila | -20 °C - +120 °C |
| Puristimen profiili | M |
| Jäätymisenestoaineen pitoisuus | enintään 50 % |
| Mitat piirustuksen mukaan | L 42 mm, Z 21 mm |
| Pesuvesi | ei sovellu |
Các thông số bổ sung
| Danh mục hàng: | IVAR.IVN20 - 90° kaaret FF PRESS |
|---|---|
| Bảo hành: | 2 năm |
| Saatavuus: | Varastossa tai toimittajalla |
| Koodi: | IVN420.15 |
| Valmistaja: | IVAR |
| Tyyppi: | IVAR.IVN420 |
| Muodonmuutostyyppi: | 90° kaari, PRESS x PRESS, ei-reduktiivinen |
| Putken halkaisija (d): | 15 mm |
| Materiaali: | Ruostumaton teräs AISI 304 (1.4301) |
| Tiiviste: | EPDM-O-rengas, LBP-versio |
| Puristusmerkki: | kyllä, oranssi raita |
| Maksimityöpaine: | PN 16 |
| Maksimipaine: | -0,8 bar (absoluuttinen paine 0,2 bar) |
| Käyttöympäristön lämpötila: | -20 °C - +120 °C |
| Puristusleukojen profiili: | M |
| Jäätymisenestoaineen pitoisuus: | enintään 50 % |
| Mitat piirustuksen mukaan: | L 42 mm, Z 21 mm |
| Juomavesi: | ei sovellu |
Đánh giá sản phẩm
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
Thảo luận
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
