Eshop roka 2025 s vykurovacou technikou

90° PRESS GAS -liitoskappale sisäpuolella kierteellä - 28mm-Rp1" IVAR.IVN30 GAS

Mã số: IVNGAS30.2810
Chưa được đánh giá Chi tiết đánh giá
44,53 € –20 %
Vykurovacia technika Prechodové koleno 90° PRESS GAS - s vnútorným závitom  - 28mm-Rp1"
44,53 € –20 % 35,62 € / Cái 28,96 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

90° PRESS GAS -liitoskappale sisäpuolella kierteellä - 28mm-Rp1"

Usein kysytyt kysymykset

  • Mitä työkaluja tarvitsen tämän liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristuspuristimet, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmästä riippuen) sopivan koon ja tyypin liittimelle - ilman oikeaa työkalua liitos ei ole mahdollista luoda tai tarkistaa.
  • Mistä tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet on varustettu puristusindikaattorilla (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos on upotettu seinään tai tasoitukseen, on aina tehtävä järjestelmän paineentarkistus.
  • Voidaanko liitos purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitäisikö asennuksen suorittaa asiantuntija? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysteknikon tai asentajan tehtäväksi, varsinkin liitoksissa, jotka upotetaan seinään tai tasoitukseen ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN30 GAS - 90° sisäkierteellä varustettu siirtymäkulma PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:06:55

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Á avatar của tác giả 26.10.2026 07:14
Már megvan a 28 mm-es csőm, de félek, hogy a préselő gép feje nem fog rájönni erre az ívre. Milyen gépre kell számolnom?
A avatar của tác giả 26.10.2026 07:14
Ehhez egy speciális préselőfogó szükséges a megfelelő méretű préselőfejjel (általában B, F vagy TH jelölésű). A szerszám nélkül a kötés nem hozható létre és nem is ellenőrizhető, ezért érdemes szakemberre bízni a szerelést.
R avatar của tác giả 13.09.2026 09:28
Kupujem toto koleno na plyn, ale neviem či mi to vôbec pasuje - mám doma rúrku čo má priemer asi palec a niečo, ale na kolene píše 28mm a Rp1"... to sú dve rôzne veci alebo to funguje spolu?
A avatar của tác giả 13.09.2026 09:28
Nebojte sa, je to práve na to určené - jedna strana je 28mm (to je vonkajší priemer rúrky, ktorú zasuniete a upevníte PRESS systémom), a druhá strana Rp1" je vnútorný závit, na ktorý sa skrúti napríklad plynový spotrebič alebo ventil so závitom 1 palec. Takže tieto dve rôzne miery sú zámerne, koleno slúži práve na prechod medzi týmito dvoma typmi pripojenia.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.