Eshop roka 2025 s vykurovacou technikou

90° PRESS GAS -liitoskappale sisäpuolella kierteellä - 22mm-Rp3/4" IVAR.IVN30 GAS

Mã số: IVNGAS30.2234
Chưa được đánh giá Chi tiết đánh giá
28,17 € –19 %
Vykurovacia technika Prechodové koleno 90° PRESS GAS - s vnútorným závitom  - 22mm-Rp3/4"
28,17 € –19 % 22,54 € / Cái 18,33 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

90° PRESS GAS -liitoskappale sisäpuolella kierre - 22mm-Rp3/4"

Usein kysytyt kysymykset

  • Mitä työkaluja tarvitsen tämän liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristuspihdit oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaavalle koolle ja liittimelle - ilman oikeita työkaluja liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä järjestelmän paineentarkistus.
  • Voidaanko liitos avata sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitos, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitäisikö asennuksen suorittaa ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysteknikon tai asentajan tehtäväksi, varsinkin liitoksissa, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN30 GAS - 90° sisäkierteellä varustettu siirtymäkulma PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:06:29

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 29.10.2026 11:30
Ahoj, potrebujem spojiť 22mm rúrku s plynovou prípojkou. Je toto koleno naozaj len pre nerezové potrubia a ako viem, že to bude tesniť, keďže tam je vnútorný závit?
A avatar của tác giả 29.10.2026 11:30
Áno, tento fiting je presne určený na nerezové rúry (materiál AISI 316L) a spája ich s plynovým rozvodom cez vnútorný závit Rp3/4". Tesnenie zaisťuje žltý O-krúžok HNBR, ktorý má atest SZÚ Brno aj DVGW. Na správny spoj však potrebuješ špecializované lisovacie kliešte, bežné náradie nestačí.
R avatar của tác giả 21.08.2026 11:24
Chcem pripojiť plynový kotol a neviem či toto koleno pasuje na rúrku čo mám doma, má priemer asi 22mm a na kotle je taká väčšia závitová prípojka. Dá sa to na seba napojiť?
A avatar của tác giả 21.08.2026 11:24
Áno, toto koleno je presne na takéto prepojenie – na jednej strane sa nasúva na rúrku 22mm a na druhej má vnútorný závit Rp3/4", čo je štandardná veľkosť, aká býva na kotloch. Je to PRESS GAS spoj, takže montáž je tlakovým lisom bez spájkovania. Odporúčame montáž nechať na plynárenského inštalatéra.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.