Eshop roka 2025 s vykurovacou technikou

90° PRESS GAS -liitoskappale sisäpuolella kierteellä - 18mm-Rp1/2" IVAR.IVN30 GAS

Mã số: IVNGAS30.1812
Chưa được đánh giá Chi tiết đánh giá
23 € –20 %
Vykurovacia technika Prechodové koleno 90° PRESS GAS - s vnútorným závitom - 18mm-Rp1/2"
23 € –20 % 18,40 € / Cái 14,96 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

90° PRESS GAS -liitoskappale - sisäpuolinen kierre - 18mm-Rp1/2"

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristuspuristimet, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmästä riippuen) vastaamaan liittimen kokoa ja tyyppiä - ilman oikeaa työkalua liitosta ei voida muodostaa tai tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina suoritettava järjestelmän paineentarkistus.
  • Voidaanko liitos purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmityslaitteen asentajalle, varsinkin liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN30 GAS - 90° sisäkierteellä varustettu siirtymäkulma PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:06:16

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Ó avatar của tác giả 24.10.2026 20:21
Tengo la duda de si este codo de transición 90° con rosca interna de 18 mm-Rp1/2" es apto para instalaciones enterradas en paredes y si su material de acero inoxidable AISI 316L garantiza la resistencia necesaria para gas natural o propano.
A avatar của tác giả 24.10.2026 20:21
Hola Óscar, sí, el producto está certificado para distribución de gas natural y propano gracias a su material de acero inoxidable 1.4404. Sin embargo, como se trata de una unión por presión permanente, es obligatorio que un técnico profesional realice la instalación y la prueba de presión antes de cualquier recubrimiento en pared.
R avatar của tác giả 17.08.2026 16:04
Dobrý deň prajem, chcem sa opýtať, či toto prechodové koleno 18mm-Rp1/2" je určené aj pre plynové rozvody, alebo len pre vodu – zaujíma ma to kvôli pripojeniu plynového kotla.
A avatar của tác giả 17.08.2026 16:04
Áno, toto koleno je priamo určené na plynové rozvody, čo naznačuje aj označenie GAS v názve. Lisovací spoj 18mm sa spojí s medeným alebo oceľovým potrubím, a vnútorný závit Rp1/2" slúži na pripojenie k plynovému spotrebiču alebo armatúre. Na plynové inštalácie je však vždy potrebný oprávnený montér.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.