Eshop roka 2025 s vykurovacou technikou

54 mm HNBR GAS -rengas (keltainen) IVAR.IVO.HNBR Z

Mã số: I002585
Chưa được đánh giá Chi tiết đánh giá
2,76 € –19 %
Vykurovacia technika O-krúžok GAS - 54mm (žltý)
2,76 € –19 % 2,21 € / Cái 1,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

O-rengas IVAR.IVO.HNBR Z halkaisijaltaan 54 mm toimii tiivisteenä ruostumattomien putkien ja IVAR.PRESS GAS -liittimien järjestelmässä, jota käytetään maakaasun, biokaasun ja nestekaasun jakeluun kaasumaisessa muodossa. Rengas on valmistettu HNBR:stä ja sen väri on keltainen.

Se on tarkoitettu enimmäiskäyttöpaineelle PN 5 ja lämpötiloille -20 °C – +70 °C. Samaa tyyppiä toimitetaan myös putkille, joiden halkaisijat ovat 18, 22, 28, 35, 42, 76,1, 88,9 ja 108 mm.

Kaasujohtojen asennus ja korjaukset saa suorittaa vain asianmukaisen pätevyyden omaava ammattilainen.

Tekniset tiedot

KoodiI002585
ValmistajaIVAR
TyyppiIVAR.IVO.HNBR Z
Putken halkaisija54 mm
MateriaaliHNBR
Värikeltainen
EnimmäiskäyttöpainePN 5
Käyttöympäristön lämpötila-20 °C – +70 °C
Väliainemaakaasu, biokaasu, nestekaasu (kaasumainen)
JärjestelmäIVAR.PRESS GAS (ruostumattomat putket)

Usein kysyttyä

Mihin putkiin ja liittimiin rengas on tarkoitettu?
Se on tiivisterenkaana IVAR.PRESS GAS -järjestelmän liittimissä 54 mm halkaisijaltaan oleville ruostumattomille putkille. Muille järjestelmän putkien halkaisijoille rengas on saatavilla kokoissa 18, 22, 28, 35, 42, 76,1, 88,9 ja 108 mm.

Mihin kaasuihin ja käyttöolosuhteisiin rengas soveltuu?
Se soveltuu maakaasun, biokaasun ja nestekaasun jakeluun kaasumaisessa muodossa. Enimmäiskäyttöpaine on PN 5 ja käyttöympäristön lämpötila -20 °C – +70 °C.

Onko asennuksen suoritettava ammattilainen?
Kyllä, rengas on osa kaasujohtoa, jonka asennus ja korjaukset saa suorittaa vain asianmukaisen pätevyyden omaava ammattilainen.

Các thông số bổ sung

Danh mục hàng: IVAR.IVO.HNBR Z - O-rengas KAASU
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Koodi: I002585
Valmistaja: IVAR
Tyyppi: IVAR.IVO.HNBR Z
Putken halkaisija: 54 mm
Materiaali: HNBR
Väri: keltainen
Maksimipaine: PN 5
Käyttöympäristön lämpötila: -20 °C - +70 °C
Väliaine: maakaasu, biokaasu, propaani (kaasufaasi)
Järjestelmä: IVAR.PRESS GAS (ruostumaton putki)

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 26.10.2026 09:15
Ho bisogno di sostituire un guarnizione su una rete a gas naturale, questo anello da 54 mm in HNBR è compatibile con pressioni fino a PN10 e temperature tra -20 e +70 gradi?
A avatar của tác giả 26.10.2026 09:15
Sì, l'Anello O GAS da 54 mm in materiale HNBR è appositamente progettato per reti di distribuzione del gas naturale, biogas e propano liquido. Rispetta i requisiti di pressione massima PN 10 e lavora correttamente nell'intervallo di temperatura da -20 °C a +70 °C indicato nelle specifiche. Se ha dubbi sul suo impianto specifico, può contattarci descrivendo il sistema prima dell'acquisto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.