Eshop roka 2025 s vykurovacou technikou

5/4" kaksitieinen vyöhykkeen sulkija ilman servomoottoria IVAR.527 LK

Mã số: I066266
Chưa được đánh giá Chi tiết đánh giá
101,60 € –20 %
Vykurovacia technika Dvojcestný zónový uzáver bez servopohonu - 5/4"
101,60 € –20 % 81,28 € / Cái 66,08 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kaksitieinen vyöhykekytkin ilman servomoottoria - 5/4"

  • PN 32, T= +2 °C - +110 °C
  • korkea virtauskykyinen suljin
  • syöttöjännite 230 V / 50 Hz, IP 40
  • vääntömomentti 5 Nm
  • pyörähdysnopeus 90°, aikavakio 12 s / 30 s
  • IVAR.527 LK - kaksitieinen vyöhykekytkin
  • sisäiset kierteet FF
  • materiaali messinki CW617N, PVC

Usein kysyttyä

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on oltava vähintään järjestelmän todellisten käyttöolosuhteiden mukaisia, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkulaitteiden asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska ne ovat turvallisuustoimintoisia.

Các thông số bổ sung

Danh mục hàng: vyöhykeventtiilit
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:03:28

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

L avatar của tác giả 19.11.2026 12:37
Guten Tag zusammen, wir wollen das Teil ohne Servomotor einbauen und später selber nen Motor dranmachen, geht das überhaupt oder brauch ich unbedingt gleich einen von euch dazu? Und hält das Ding auch bei heißem Heizwasser aus, also so Richtung 90 Grad?
A avatar của tác giả 19.11.2026 12:37
Hallo Lukas, das Ventil ist für Temperaturen von +2 °C bis +110 °C ausgelegt, 90 Grad sind also überhaupt kein Problem. Ohne Servomotor lässt sich die Absperrklappe aber nicht automatisch steuern, dafür braucht ihr einen passenden Antrieb mit 230 V, der das nötige Drehmoment von 5 Nm und den Drehwinkel von 90° bedienen kann. Schaut am besten in unserer Kategorie Zonenventile nach einem passenden Servomotor dazu, falls ihr nicht gleich ein Komplettset nehmen wollt.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.