Eshop roka 2025 s vykurovacou technikou

45° Press Gas Bend - 28mm IVAR.IVN22 GAS

Mã số: IVNGAS22.28
Chưa được đánh giá Chi tiết đánh giá
19,93 € –20 %
Vykurovacia technika Oblúk 45° PRESS GAS - 28mm
19,93 € –20 % 15,94 € / Cái 12,96 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

45° PRESS GAS -kaari - 28mm

Huomio: Press GAS -liittimien koot 76,1, 88,9 ja 108 mm tilauksesta

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristuspuristimet, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmästä riippuen) sopivalle koolle ja tyypille - ilman oikeita työkaluja liitosta ei voida muodostaa tai tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet on varustettu puristusindikaattorilla (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina suoritettava järjestelmän paineenkestävyystesti.
  • Voidaanko liitos purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysteknikon tai putkimiehen tehtäväksi, erityisesti liitoksissa, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN22 GAS - 45° kaaret FF PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:01:40

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

S avatar của tác giả 16.11.2026 08:31
Could you kindly confirm whether this 45° PRESS GAS elbow, given its Wst. Nr. 1.4404 stainless steel construction and PN 5 rating, is certified for use with propane in the gas phase, and whether the sealing material is suitable for the stated temperature range of -20°C to +70°C?
A avatar của tác giả 16.11.2026 08:31
Yes, this elbow is made for natural gas, biogas and propane in the gas phase, no problem there. It's stainless steel 1.4404 (AISI 316L) with a yellow HNBR O-ring, rated PN 5 and good for -20°C to +70°C, and it's certified by SZU Brno and DVGW. Just make sure you press it with the correct jaw for the GAS system - if you need other sizes like 76.1, 88.9 or 108 mm, those are available on order.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.